暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Straight brass tube, deep red finish, 14mm OD, 500mm length

Bitspower

Bitspower None Chamfer Brass Hard Tubing OD14mm Deep Red 500mm

SKU CH-N27Q-PMPYS

Brass hard tubing with 14 mm outer diameter and .7 mm wall thickness, 500 mm long in deep red for custom liquid-cooling loops

  • TypeLiquid Cooling System
  • Deep red brass tubing adds vivid colour to custom loops
  • OD 14 mm brass tube with 0.7 mm wall thickness for strength
  • 500 mm straight length ready to cut and chamfer
  • Double wall thickness improves durability in high-pressure builds
  • RoHS compliant material meets environmental safety standards

Hard-tubing for custom loops

This 14 mm outer-diameter brass tube is cut to 500 mm and finished in a deep-red coating. It is intended for builders assembling a custom liquid-cooling loop who want rigid tubing with a distinctive colour. The plain ends require cutting and chamfering before installation.

Thermals and power

The tube itself carries no active components, so it adds no heat, noise or electrical draw to the system. Thermal performance depends entirely on the coolant, radiator and pump chosen by the builder.

Build and connections

Double-thickness walls at 0.7 mm give the brass extra rigidity and durability. RoHS-compliant material ensures restricted substances are absent. Bitspower recommends using their OD14 mm hard-fitting series and the dedicated BP-CMMTC metal tubing cutter to avoid damaging the coloured coating during preparation.

特長

  • Deep red brass tubing adds vivid colour to custom loops
  • OD 14 mm brass tube with 0.7 mm wall thickness for strength
  • 500 mm straight length ready to cut and chamfer
  • Double wall thickness improves durability in high-pressure builds
  • RoHS compliant material meets environmental safety standards

仕様

TypeLiquid Cooling System

この商品に関する質問

How do I install the 14 mm OD brass tubing without cracking the deep red finish?

Cut to length with the Bitspower BP-CMMTC metal tubing cutter, then chamfer the ends before inserting into OD14 mm hard fittings; the cutter prevents the colour coating from breaking.

What upkeep will the brass tube need after it is in the loop?

The RoHS-compliant brass resists corrosion, so only periodic coolant changes and visual checks for discolouration or deposits are required; the tube itself has no service interval.

At what point does the 0.7 mm wall thickness limit heat dissipation during long loads?

The thin 0.7 mm wall transfers heat quickly, so the practical limit is the coolant temperature reaching the fluid’s thermal capacity, not the tube wall itself.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。