暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 288-pin DDR4 DIMM with black chips and silver heatsink

Brute Networks

Brute Networks 32GB DDR4-2933 2Rx4 Registered ECC server RAM

SKU CH-KE7W-JWZ10

Dell-compatible 32 GB registered ECC DDR4-2933 module with 2Rx4 organisation and 1.2 V operation

  • Capacity32GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 32 GB capacity supports demanding server workloads
  • DDR4 2933 MHz speed enables fast data throughput
  • Registered ECC design protects data integrity
  • 2 V operation reduces power consumption
  • 288-pin DDR4 form factor fits compatible server slots

32GB Registered ECC DDR4 module

This 32GB DDR4-2933 registered ECC module is built for Dell servers that require 288-pin PC4-23400 memory. It operates at 1.20V with a 2Rx4 organisation and uses major-brand DRAM chips. The part matches Dell part number 370-AEQI and is validated for 100 percent compatibility.

Replaces slower or smaller DDR4 DIMMs

Upgrading from lower-capacity or lower-speed DDR4 registered ECC modules is worthwhile when the server workload demands more memory bandwidth or larger datasets in flight. The 32GB density reduces the number of occupied slots, leaving room for future expansion. Systems already running at the maximum supported speed will not see a frequency gain from this module.

Limited to DDR4-2933 registered ECC platforms

The module only works in systems that support DDR4 registered ECC memory at 2933 MT/s and accept 288-pin DIMMs. It cannot be used in desktop boards that require unbuffered non-ECC memory, nor in platforms limited to earlier DDR4 speeds. Mixing with modules of different ranks, voltages or speeds may prevent the server from posting.

特長

  • 32 GB capacity supports demanding server workloads
  • DDR4 2933 MHz speed enables fast data throughput
  • Registered ECC design protects data integrity
  • 2 V operation reduces power consumption
  • 288-pin DDR4 form factor fits compatible server slots

仕様

BrandDell
Capacity32GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset

この商品に関する質問

Does the 288-pin DDR4 module fit a standard DDR4 DIMM slot?

Yes, the 288-pin DDR4 form factor matches standard DDR4 DIMM slots used in compatible servers.

What is the correct way to seat the registered ECC module, and what step is often missed?

Align the notch with the slot key, press firmly until both retention clips click, and verify the module height clears any CPU cooler.

When should the 32GB 2Rx4 registered ECC module be replaced?

Replace if memory diagnostics report uncorrectable ECC errors or if the server fails to recognise the full 32GB capacity at 2933MHz.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。