We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 288-pin DDR4 DIMM with black chips and silver heatsink

Brute Networks

Brute Networks 32GB DDR4-2933 2Rx4 Registered ECC server RAM

SKU CH-KE7W-JWZ10

Dell-compatible 32 GB registered ECC DDR4-2933 module with 2Rx4 organisation and 1.2 V operation

  • Capacity32GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 32 GB capacity supports demanding server workloads
  • DDR4 2933 MHz speed enables fast data throughput
  • Registered ECC design protects data integrity
  • 2 V operation reduces power consumption
  • 288-pin DDR4 form factor fits compatible server slots

32GB Registered ECC DDR4 module

This 32GB DDR4-2933 registered ECC module is built for Dell servers that require 288-pin PC4-23400 memory. It operates at 1.20V with a 2Rx4 organisation and uses major-brand DRAM chips. The part matches Dell part number 370-AEQI and is validated for 100 percent compatibility.

Replaces slower or smaller DDR4 DIMMs

Upgrading from lower-capacity or lower-speed DDR4 registered ECC modules is worthwhile when the server workload demands more memory bandwidth or larger datasets in flight. The 32GB density reduces the number of occupied slots, leaving room for future expansion. Systems already running at the maximum supported speed will not see a frequency gain from this module.

Limited to DDR4-2933 registered ECC platforms

The module only works in systems that support DDR4 registered ECC memory at 2933 MT/s and accept 288-pin DIMMs. It cannot be used in desktop boards that require unbuffered non-ECC memory, nor in platforms limited to earlier DDR4 speeds. Mixing with modules of different ranks, voltages or speeds may prevent the server from posting.

Highlights

  • 32 GB capacity supports demanding server workloads
  • DDR4 2933 MHz speed enables fast data throughput
  • Registered ECC design protects data integrity
  • 2 V operation reduces power consumption
  • 288-pin DDR4 form factor fits compatible server slots

Specifications

BrandDell
Capacity32GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset

Questions about this item

Does the 288-pin DDR4 module fit a standard DDR4 DIMM slot?

Yes, the 288-pin DDR4 form factor matches standard DDR4 DIMM slots used in compatible servers.

What is the correct way to seat the registered ECC module, and what step is often missed?

Align the notch with the slot key, press firmly until both retention clips click, and verify the module height clears any CPU cooler.

When should the 32GB 2Rx4 registered ECC module be replaced?

Replace if memory diagnostics report uncorrectable ECC errors or if the server fails to recognise the full 32GB capacity at 2933MHz.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.