OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
Brute Networks
8GB registered DDR4-2133 ECC module with CL15 latency for Dell servers
This 8GB registered DDR4 module runs at 2133 MT/s with CL15 latency and 1.20V operation. It uses a 288-pin 2Rx8 layout and includes ECC for error correction. The part is validated for Dell servers and replaces Dell part number A7945704. It is built with major-brand DRAM from Samsung, SK Hynix or Micron.
The jump is worthwhile when a server needs registered memory with ECC for data integrity and the current slots are populated with smaller modules. Adding this 8GB stick increases total capacity while maintaining the required registered signal buffering. It also helps when matching existing 2133 MT/s speeds across all channels for stable operation.
Align the notch on the 288-pin edge connector with the motherboard key and press until the latches click. Ensure the server supports registered DDR4 and that all populated slots use identical speed and rank configurations. Mismatched ranks or mixing registered with unbuffered DIMMs will prevent boot or cause instability.
| Brand | Dell |
|---|---|
| Capacity | 8GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
Yes, the 288-pin DDR4 registered form factor matches standard server DIMM sockets.
Align the off-centre notch on the gold edge with the slot key, press straight down until both side clips click.
These chips are rated for continuous operation; replacement is only needed if a module fails or capacity must be increased.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?