Centon
Centon S1-S3A-2T 2TB 2.5" SATA internal SSD
2.5" SATA internal SSD delivering 520 MB/s reads and 490 MB/s writes for faster boots and application response
- Form Factor2.5"
- Capacity2TB
- InterfaceSATA III
- CacheNo DRAM (SLC)
- Faster boot and application response with 520 MB/s sequential read
- Quicker file saves and transfers at 490 MB/s sequential write
- Greater reliability and longer lifespan thanks to no moving parts
- Extended laptop battery life from low power consumption
- Works in older systems with SATA II backward compatibility
Capacity and interface
This Centon S1-S3A-2T is a 2TB internal solid-state drive in the 2.5 inch form factor with a SATA III interface. It is designed to replace a mechanical hard drive in laptops or desktops and deliver faster boot and application load times.
Suitable uses and limits
The drive suits anyone upgrading an older SATA-based system who wants lower power draw and silent operation without moving parts. It is less appropriate for platforms that only provide M.2 PCIe slots or for workloads needing sustained write throughput beyond the SLC cache.
Sequential speed rating
Sequential read reaches 520 MB/s and sequential write reaches 490 MB/s over the SATA III link, so those figures determine whether the drive meets the performance target for a given upgrade.
特長
- Faster boot and application response with 520 MB/s sequential read
- Quicker file saves and transfers at 490 MB/s sequential write
- Greater reliability and longer lifespan thanks to no moving parts
- Extended laptop battery life from low power consumption
- Works in older systems with SATA II backward compatibility
仕様
| Brand | Centon |
|---|---|
| Model | S1-S3A-2T |
| Part Number | S1-S3A-2T |
| Form Factor | 2.5" |
| Capacity | 2TB |
| Interface | SATA III |
| Cache | No DRAM (SLC) |
| 配送重量 | 0.09 kg |
| 梱包サイズ | 127 × 10 × 5 mm |
この商品に関する質問
Should I pick the 2TB SATA III version or a smaller capacity?
The 2TB model gives you the full 520 MB/s read and 490 MB/s write speeds in a 2.5 form factor; smaller capacities may have lower write performance.
What do the 520 MB/s read and 490 MB/s write figures mean once the drive is installed in my laptop?
Those are sequential speeds measured on a SATA III link; real-world boot and app launches will feel much faster than a hard drive but will not exceed those numbers.
The drive uses SATA III — what does that cap in practice?
SATA III limits the drive to its rated 520 MB/s read and 490 MB/s write; it also works in older SATA II slots at reduced throughput.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
HP 628059-B21 3TB 7200 RPM SATA 3.0Gb/s 3.5" internal hard drive
- Bare Drive
- SATA 3.0Gb/s
Seagate Cheetah 10K.7 ST3300007LC 300GB 10000 RPM 8MB SCSI Ultra320 80pin 3.5" internal hard drive
- Bare Drive
- SCSI Ultra320 80pin
IBM 49Y2003 600GB 2.5" SAS 10000 RPM 16MB internal hard drive
- SAS 6Gb/s
- 10000 RPM



