暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green DDR3 memory sticks with gold contacts and black chips

Computer Memory Solutions

Computer Memory Solutions 16GB (4x4GB) DDR3 1333 ECC Registered DIMM Server Memory Upgrade

SKU CH-1FGS-PE2T4

A 16 GB quad-channel kit of four 4 GB DDR3-1333 ECC registered DIMMs validated for Supermicro H8DGT and H8DGU server boards

  • Capacity16GB (4 x 4GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • 16 GB registered ECC kit for Supermicro servers
  • DDR3 1333 MHz CL9 for stable throughput
  • 5 V operation matches platform spec
  • 240-pin 2Rx4 modules install in quad-channel
  • Guaranteed compatibility with H8DGT and H8DGU models

Server Memory Kit

This 16GB kit contains four 4GB DDR3 1333 registered ECC DIMMs built for Supermicro H8DGT-HIBQF, H8DGT-HF, H8DGU and H8DGU-F servers. Each module runs at 1.5V with CL9 timing and a 2Rx4 organisation. The 240-pin form factor matches the approved board slots exactly.

Suitable For Qualified Platforms Only

IT teams maintaining the listed Supermicro dual-socket servers can install this kit with guaranteed compatibility. Builders using consumer motherboards, workstations that require unbuffered memory, or any platform not named in the compatibility list should look elsewhere because registered ECC modules will not function in those systems.

Registered ECC Requirement

The decisive specification is the registered ECC design; only motherboards wired for registered DDR3 DIMMs will accept these sticks. If your server manual specifies unbuffered or non-ECC memory, this kit is not the right part.

特長

  • 16 GB registered ECC kit for Supermicro servers
  • DDR3 1333 MHz CL9 for stable throughput
  • 5 V operation matches platform spec
  • 240-pin 2Rx4 modules install in quad-channel
  • Guaranteed compatibility with H8DGT and H8DGU models

仕様

BrandComputer Memory Solutions
ModelCM5127210600ECCR2R4H
Capacity16GB (4 x 4GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderBased on Current Inventory (If Required Please Contact)
Compatible SystemSupermicro H8DGT-HIBQF, H8DGT-HF, H8DGU, H8DGU-F
Package Content4 Memory RAM Sticks

この商品に関する質問

Does DDR3-1333 (PC3-10600) limit the memory speed on these Supermicro boards?

The modules run at DDR3-1333 (PC3-10600). The Supermicro H8DGT and H8DGU platforms support up to 512 GB of registered ECC RDIMMs, so the 16 GB kit operates at its rated speed within the platform maximum.

What physical slot and form factor do the 4x4 GB modules require?

Each stick is a 240-pin DDR3 registered DIMM. The target Supermicro boards use standard 240-pin DDR3 DIMM sockets, so the modules fit directly without adapters.

How are the four registered DIMMs installed, and what step is often missed?

Populate the DIMM slots per the Supermicro H8DGT/H8DGU population guide for registered ECC memory. The common mistake is mixing registered and unbuffered modules or skipping the required slot order for multi-CPU configurations.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。