Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się

Computer Memory Solutions

Computer Memory Solutions 16GB (4x4GB) DDR3 1333 ECC Registered DIMM Server Memory Upgrade

SKU CH-1FGS-PE2T4

A 16 GB quad-channel kit of four 4 GB DDR3-1333 ECC registered DIMMs validated for Supermicro H8DGT and H8DGU server boards

  • Capacity16GB (4 x 4GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • 16 GB registered ECC kit for Supermicro servers
  • DDR3 1333 MHz CL9 for stable throughput
  • 5 V operation matches platform spec
  • 240-pin 2Rx4 modules install in quad-channel
  • Guaranteed compatibility with H8DGT and H8DGU models

Server Memory Kit

This 16GB kit contains four 4GB DDR3 1333 registered ECC DIMMs built for Supermicro H8DGT-HIBQF, H8DGT-HF, H8DGU and H8DGU-F servers. Each module runs at 1.5V with CL9 timing and a 2Rx4 organisation. The 240-pin form factor matches the approved board slots exactly.

Suitable For Qualified Platforms Only

IT teams maintaining the listed Supermicro dual-socket servers can install this kit with guaranteed compatibility. Builders using consumer motherboards, workstations that require unbuffered memory, or any platform not named in the compatibility list should look elsewhere because registered ECC modules will not function in those systems.

Registered ECC Requirement

The decisive specification is the registered ECC design; only motherboards wired for registered DDR3 DIMMs will accept these sticks. If your server manual specifies unbuffered or non-ECC memory, this kit is not the right part.

Najważniejsze cechy

  • 16 GB registered ECC kit for Supermicro servers
  • DDR3 1333 MHz CL9 for stable throughput
  • 5 V operation matches platform spec
  • 240-pin 2Rx4 modules install in quad-channel
  • Guaranteed compatibility with H8DGT and H8DGU models

Specyfikacja

BrandComputer Memory Solutions
ModelCM5127210600ECCR2R4H
Capacity16GB (4 x 4GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderBased on Current Inventory (If Required Please Contact)
Compatible SystemSupermicro H8DGT-HIBQF, H8DGT-HF, H8DGU, H8DGU-F
Package Content4 Memory RAM Sticks

Pytania dotyczące tego produktu

Does DDR3-1333 (PC3-10600) limit the memory speed on these Supermicro boards?

The modules run at DDR3-1333 (PC3-10600). The Supermicro H8DGT and H8DGU platforms support up to 512 GB of registered ECC RDIMMs, so the 16 GB kit operates at its rated speed within the platform maximum.

What physical slot and form factor do the 4x4 GB modules require?

Each stick is a 240-pin DDR3 registered DIMM. The target Supermicro boards use standard 240-pin DDR3 DIMM sockets, so the modules fit directly without adapters.

How are the four registered DIMMs installed, and what step is often missed?

Populate the DIMM slots per the Supermicro H8DGT/H8DGU population guide for registered ECC memory. The common mistake is mixing registered and unbuffered modules or skipping the required slot order for multi-CPU configurations.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.