暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green 184-pin DDR ECC registered DIMMs, no heat spreaders

Computer Memory Solutions

Computer Memory Solutions CM256722100ERDIMM 8GB (4 x 2GB) DDR 266 ECC Registered memory upgrade

SKU CH-C6DW-0M9HA

8GB kit of four 2GB DDR 266 ECC registered 184-pin DIMMs for Sun Blade 1500 and 2500 servers

  • Capacity8GB (4 x 2GB)
  • Type184-Pin DDR SDRAM
  • SpeedDDR 266 (PC 2100)
  • CAS LatencyCL2
  • Timing2-2-2
  • Voltage2.5V
  • ECC protection guards data integrity on Sun Blade servers
  • Registered DDR 266 modules deliver stable 2100 MT/s throughput
  • 184-pin DIMMs install directly in Blade 1500 and 2500 slots
  • Four 2 GB sticks populate all channels for 8 GB total
  • 5 V CL2 timing meets original Sun Blade specifications

8GB Registered DDR Kit for Sun Blade

This 8GB kit from Computer Memory Solutions contains four 2GB registered DIMMs built for Sun Blade 1500, 2500, Sx1500 and Sx2500 servers. Each module uses a 184-pin DDR interface and includes ECC for data integrity. The kit is sold new and guaranteed compatible with the listed models.

Suitable for Sun Blade upgrades.

The modules match the Sun Blade 1500, 2500, Sx1500 and Sx2500 specifications, so they serve administrators restoring or expanding those systems. Builders working with any other workstation or server platform should look elsewhere because the pin layout, voltage and registration are specific to the listed Sun hardware.

184-pin DDR 266 registered ECC specification

The decisive specification is the 184-pin DDR 266 registered ECC design with 2.5V operation and CL2 timing. Only systems that accept this exact module type can use the kit, so verify the server documentation before ordering.

特長

  • ECC protection guards data integrity on Sun Blade servers
  • Registered DDR 266 modules deliver stable 2100 MT/s throughput
  • 184-pin DIMMs install directly in Blade 1500 and 2500 slots
  • Four 2 GB sticks populate all channels for 8 GB total
  • 5 V CL2 timing meets original Sun Blade specifications

仕様

BrandComputer Memory Solutions
ModelCM256722100ERDIMM
Capacity8GB (4 x 2GB)
Type184-Pin DDR SDRAM
SpeedDDR 266 (PC 2100)
CAS LatencyCL2
Timing2-2-2
Voltage2.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemSun Blade 1500, 2500, Sx1500, Sx2500
Package Content4 Memory RAM Sticks

この商品に関する質問

Does the PC2100 rating limit bandwidth on a Sun Blade 2500?

The kit runs at DDR 266 (PC 2100), so the memory bus is capped at 266 MHz per module.

Will the 184-pin DIMMs fit the Sun Blade 1500 chassis?

Yes, each stick is a 184-pin DDR SDRAM DIMM, the form factor used by the Blade 1500 and 2500 series.

What is the correct order to install the four 2 GB registered DIMMs?

Populate the lowest-numbered sockets first; registered DIMMs must fill bank 0 before bank 1 to avoid a POST hang.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。