SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00502358BTC
在庫あり
Computer Memory Solutions
Computer Memory Solutions CM256723200ECCREG2R4 4GB (2×2GB) DDR2 400 Registered ECC memory upgrade
Registered DDR2 400 ECC kit with two 2 GB modules for Dell PowerEdge SC1425 servers
- Capacity4GB (2 x 2GB)
- Type240-Pin DDR2 SDRAM
- SpeedDDR2 400 (PC2 3200)
- CAS LatencyCL3
- Timing3-3-3
- Voltage1.8V
- 4GB kit for Dell PowerEdge SC1425 servers
- Registered DDR2 400 MHz with CL3 timing
- 240-pin ECC DIMMs for error correction
- 8V operation reduces power draw
- Dual-rank 2Rx4 configuration supports 8-rank limit
System-Specific DDR2 Kit
This 4 GB kit contains two 2 GB registered ECC DIMMs built for the Dell PowerEdge SC1425 server. Each module uses a 240-pin DDR2 interface running at 400 MHz with CL3 timing. The dual-rank design matches the platform requirement that additional memory be installed in pairs.
Sustained Load Behaviour
Registered buffering reduces electrical load on the memory controller during continuous server workloads. ECC circuitry detects and corrects single-bit errors without halting the system. Dual-rank organisation allows the chipset to interleave accesses across ranks for steadier throughput under prolonged demand.
Thermals Noise Power
Modules operate at the standard 1.8 V for DDR2 with no heat spreaders attached. Passive cooling relies on chassis airflow, so noise contribution is limited to the server fans already present. Power draw scales with the two populated slots and stays within the platform’s designed envelope.
特長
- 4GB kit for Dell PowerEdge SC1425 servers
- Registered DDR2 400 MHz with CL3 timing
- 240-pin ECC DIMMs for error correction
- 8V operation reduces power draw
- Dual-rank 2Rx4 configuration supports 8-rank limit
仕様
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM256723200ECCREG2R4 |
| Capacity | 4GB (2 x 2GB) |
| Type | 240-Pin DDR2 SDRAM |
| Speed | DDR2 400 (PC2 3200) |
| CAS Latency | CL3 |
| Timing | 3-3-3 |
| Voltage | 1.8V |
| ECC | No |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Dell Poweredge Sc1425 (1425Sc |
| Package Content | 2 Memory RAM Sticks |
この商品に関する質問
How much heat and power does this 1.8V DDR2 registered kit draw when the server runs continuously?
The modules operate at 1.8 volts and use registered signalling to reduce electrical load on the memory controller, keeping heat output low enough for standard server airflow in the SC1425 chassis.
What must already be installed in the PowerEdge SC1425 for these 240-pin DIMMs to work?
The system needs a motherboard that accepts 240-pin DDR2 registered ECC memory and a BIOS that supports dual-rank 2Rx4 modules; the first slot can be filled singly, but any further memory must be added in matched pairs.
Will these CL3 400 MHz sticks run stably alongside any older PC2-3200 modules I keep in the SC1425?
Yes — all modules must run at the same 400 MHz speed and CL3 timing, so the memory controller will down-clock everything to the slowest common setting, preserving stability within the eight-rank limit of the chipset.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
