暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5 inch SATA hard drive with circuit board visible

DELL

DELL 0M33YT ST1000NM004A 1TB 7200RPM 3.5" SATA internal hard drive

SKU CH-QR30-S7A1V

A 1 TB 3.5 inch SATA desktop hard drive spinning at 7200 RPM for high-capacity internal storage

  • 1 TB capacity for desktop storage
  • 7200 RPM spindle speed for responsive data access
  • SATA 6 Gb/s interface for broad motherboard compatibility
  • 5 inch form factor fits standard drive bays
  • New condition with zero hours of prior use

Dell 0M33YT 1 TB SATA hard drive

This Dell EMC 0M33YT is a new 1 TB 3.5 inch internal hard drive that spins at 7200 RPM and connects through a SATA 6 Gb/s interface for desktop workstations and servers. The unit carries the ST1000NM004A model number and arrives with zero hours of operation.

Ideal for capacity-focused desktop builds

It suits system integrators and home users who need a single terabyte of mechanical storage for bulk data, backups or media libraries without the cost of solid-state media. Buyers who require faster random-access speeds, lower power draw or silent operation should consider solid-state alternatives instead.

SATA 6 Gb/s interface decides compatibility

The drive uses a standard 3.5 inch SATA 6 Gb/s connection, so it fits any desktop chassis and motherboard that accepts a 3.5 inch SATA hard drive. Verify that your system provides a free 3.5 inch bay and a SATA data plus power cable before purchase.

特長

  • 1 TB capacity for desktop storage
  • 7200 RPM spindle speed for responsive data access
  • SATA 6 Gb/s interface for broad motherboard compatibility
  • 5 inch form factor fits standard drive bays
  • New condition with zero hours of prior use

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Will the 1TB 7200RPM SATA 6Gb/s drive work with my older motherboard that only has SATA 3Gb/s ports?

Yes, the SATA 6Gb/s interface is backward compatible with SATA 3Gb/s ports. The drive will operate at the slower 3Gb/s speed but will function normally.

How can I verify the ST1000NM004A is healthy and running at 7200RPM after installation?

Check the drive model and RPM in BIOS or use a tool like CrystalDiskInfo to confirm 7200RPM and S.M.A.R.T. status shows good health.

Does the 0M33YT 3.5 inch drive come with mounting screws or a SATA data cable, or must I buy them separately?

The drive is sold as a bare unit weighing 2.0 pounds. Mounting screws and SATA data cables are not included and must be purchased separately.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。