我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Silver 3.5 inch SATA hard drive with circuit board visible

DELL

DELL 0M33YT ST1000NM004A 1TB 7200RPM 3.5" SATA internal hard drive

SKU CH-QR30-S7A1V

A 1 TB 3.5 inch SATA desktop hard drive spinning at 7200 RPM for high-capacity internal storage

  • 1 TB capacity for desktop storage
  • 7200 RPM spindle speed for responsive data access
  • SATA 6 Gb/s interface for broad motherboard compatibility
  • 5 inch form factor fits standard drive bays
  • New condition with zero hours of prior use

Dell 0M33YT 1 TB SATA hard drive

This Dell EMC 0M33YT is a new 1 TB 3.5 inch internal hard drive that spins at 7200 RPM and connects through a SATA 6 Gb/s interface for desktop workstations and servers. The unit carries the ST1000NM004A model number and arrives with zero hours of operation.

Ideal for capacity-focused desktop builds

It suits system integrators and home users who need a single terabyte of mechanical storage for bulk data, backups or media libraries without the cost of solid-state media. Buyers who require faster random-access speeds, lower power draw or silent operation should consider solid-state alternatives instead.

SATA 6 Gb/s interface decides compatibility

The drive uses a standard 3.5 inch SATA 6 Gb/s connection, so it fits any desktop chassis and motherboard that accepts a 3.5 inch SATA hard drive. Verify that your system provides a free 3.5 inch bay and a SATA data plus power cable before purchase.

商品特色

  • 1 TB capacity for desktop storage
  • 7200 RPM spindle speed for responsive data access
  • SATA 6 Gb/s interface for broad motherboard compatibility
  • 5 inch form factor fits standard drive bays
  • New condition with zero hours of prior use

商品規格

本商品目前尚未公佈規格。

商品問答

Will the 1TB 7200RPM SATA 6Gb/s drive work with my older motherboard that only has SATA 3Gb/s ports?

Yes, the SATA 6Gb/s interface is backward compatible with SATA 3Gb/s ports. The drive will operate at the slower 3Gb/s speed but will function normally.

How can I verify the ST1000NM004A is healthy and running at 7200RPM after installation?

Check the drive model and RPM in BIOS or use a tool like CrystalDiskInfo to confirm 7200RPM and S.M.A.R.T. status shows good health.

Does the 0M33YT 3.5 inch drive come with mounting screws or a SATA data cable, or must I buy them separately?

The drive is sold as a bare unit weighing 2.0 pounds. Mounting screws and SATA data cables are not included and must be purchased separately.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。