暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Rectangular 2.5 inch SSD with silver label, 7mm thick

DELL

DELL 30FX3 7.68TB enterprise SSD

SKU CH-Q2EC-ERDYW

High-capacity enterprise SSD built for read-intensive data-centre workloads in compatible Dell PowerEdge servers

  • InterfaceDoes Not Apply
  • 68 TB capacity supports large data sets
  • NVMe interface enables fast data transfer
  • Designed for read-intensive enterprise workloads
  • 5 inch 7 mm form factor fits standard bays
  • Compatible with Dell PowerEdge R660, R760 and R960 servers

Dell 7.68TB NVMe Gen4 RI SSD

This Dell 30FX3 drive provides 7.68TB of read-intensive NVMe Gen4 storage in a 7mm 2.5-inch form factor. It uses TLC NAND and carries the PM9A3 controller for data-centre workloads. Components are tested and firmware is updated before shipment.

Suited for Dell PowerEdge servers needing

The drive fits PowerEdge models including R660, R760, R760XD2, R670, R770 and the MX760C compute sled. Buyers who require a different physical height, a write-intensive endurance rating or a non-NVMe interface should look at other parts.

7.68TB capacity in a 7mm 2.5-inch NVMe Gen4 package

This single specification determines whether the drive matches the bay and performance profile of the target server. Verify the slot height and backplane protocol against the system documentation before ordering.

特長

  • 68 TB capacity supports large data sets
  • NVMe interface enables fast data transfer
  • Designed for read-intensive enterprise workloads
  • 5 inch 7 mm form factor fits standard bays
  • Compatible with Dell PowerEdge R660, R760 and R960 servers

仕様

BrandDell
Model30FX3, MZQL27T6HBLA-00AD3
InterfaceDoes Not Apply

この商品に関する質問

What NVMe generation does the 30FX3 SSD use and what speed ceiling does that impose?

The drive runs on NVMe Gen4, so its maximum throughput is limited to the Gen4 PCIe lane rate.

Which drive bay and height does the 30FX3 require for mounting?

It fits a standard 2.5-inch bay and is 7 mm tall, matching the slim form factor used in the listed PowerEdge servers.

How is the 30FX3 installed in a compatible PowerEdge server and what step is often missed?

Slide the drive into the hot-swap tray until the connector seats firmly, then lock the tray latch; the step often missed is fully engaging the latch so the drive reports as present.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。