暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

DELL

DELL 72Y6W 4TB 3.5" SAS 7.2K 6Gb/s internal hard drive

SKU CH-1NXR-AVTZT

A 4 TB enterprise SAS hard drive with a 7200 RPM spindle and 6 Gb/s transfer rate for 3.5-inch bays

  • PackagingBare Drive
  • InterfaceSAS 6Gb/s
  • Capacity4TB
  • RPM7200 RPM
  • Average Latency6Gb/s
  • UsageFor Enterprise Storage
  • 4 TB capacity stores large enterprise datasets
  • 7200 RPM spindle delivers responsive nearline performance
  • SAS 6 Gb/s interface integrates with existing controllers
  • 5 inch form factor fits standard drive bays
  • Dell part 72Y6W ensures OEM compatibility

Dell 72Y6W 4TB SAS drive

The Dell 72Y6W is a 4TB 3.5 inch SAS hard drive built for enterprise storage arrays and servers. It delivers 7200 RPM performance over a 6Gb/s interface for nearline workloads.

Bare drive build and SAS connector

Supplied as a bare drive without a tray, it fits standard 3.5 inch bays that accept SAS connectors. The 6Gb/s SAS link provides dual-port redundancy for continuous operation in RAID enclosures.

Verify SAS controller and bay compatibility

Confirm your backplane or HBA supports 6Gb/s SAS and supplies the correct power connector. Ensure the chassis has an open 3.5 inch slot and that your RAID firmware recognises the 72Y6W part number.

特長

  • 4 TB capacity stores large enterprise datasets
  • 7200 RPM spindle delivers responsive nearline performance
  • SAS 6 Gb/s interface integrates with existing controllers
  • 5 inch form factor fits standard drive bays
  • Dell part 72Y6W ensures OEM compatibility

仕様

BrandDell
Model72Y6W
PackagingBare Drive
InterfaceSAS 6Gb/s
Capacity4TB
RPM7200 RPM
Average Latency6Gb/s
UsageFor Enterprise Storage
Form Factor3.5"

この商品に関する質問

What does the SAS 6Gb/s interface mean for real-world transfer limits on this 4TB drive?

The 6Gb/s SAS link sets the bus ceiling; actual throughput depends on the 7200 RPM platters and workload.

Will the 3.5 inch form factor fit my server tray without an adapter?

The drive is a standard 3.5 inch unit; it mounts directly in any 3.5 inch bay or hot-plug tray that accepts bare drives.

How do I install this Nearline SAS drive in a Dell PowerEdge and what step is often missed?

Slide the bare drive into the carrier, secure the screws, insert the carrier until it clicks, then ensure the RAID controller recognises the new SAS device before initialising.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。