DELL
DELL 8WP8W 600GB 10000 RPM SAS 6Gb/s 2.5" internal hard drive
A 600 GB 10000 RPM SAS 2.5" drive built for Dell PowerEdge R710 servers
- PackagingBare Drive
- InterfaceSAS 6Gb/s
- Capacity600GB
- RPM10000 RPM
- Average Latency6Gb/s
- FeaturesCompatibility: Dell PowerEdge R710 Server
- 10000 RPM spindle speed enables rapid data access
- SAS 6Gb/s interface provides reliable server connectivity
- 600GB capacity stores substantial enterprise workloads
- 5 inch form factor fits dense PowerEdge R710 bays
- Designed for server environments with Dell compatibility
Capacity and interface
This is a Dell 8WP8W 600GB internal hard drive with a SAS 6Gb/s interface and a 10000 RPM spindle speed. The 2.5 inch form factor fits compatible server bays. It is supplied as a bare drive in new condition.
Server workloads
The drive suits administrators maintaining Dell PowerEdge R710 servers that require a 6Gb/s SAS replacement drive. Environments needing a higher spindle speed or a different physical connector should look elsewhere.
SAS 6Gb/s interface
The single specification that determines fit is the SAS 6Gb/s interface. The host backplane and controller must support this exact signalling rate for the drive to operate correctly.
特長
- 10000 RPM spindle speed enables rapid data access
- SAS 6Gb/s interface provides reliable server connectivity
- 600GB capacity stores substantial enterprise workloads
- 5 inch form factor fits dense PowerEdge R710 bays
- Designed for server environments with Dell compatibility
仕様
| Brand | Dell |
|---|---|
| Model | 8WP8W |
| Packaging | Bare Drive |
| Interface | SAS 6Gb/s |
| Capacity | 600GB |
| RPM | 10000 RPM |
| Average Latency | 6Gb/s |
| Features | Compatibility: Dell PowerEdge R710 Server |
| Usage | Ideal for Servers |
| Form Factor | 2.5" |
| 配送重量 | 0.91 kg |
| 梱包サイズ | 236 × 188 × 137 mm |
この商品に関する質問
Will the 2.5" form factor fit directly into a Dell PowerEdge R710 drive bay?
The drive uses a standard 2.5" SAS form factor compatible with Dell PowerEdge R710 bays, but it ships as a bare drive without a mounting tray or caddy.
What is the correct way to connect the SAS 6Gb/s interface during installation?
Insert the drive into the server backplane so the SAS connector seats fully; the common error is leaving the drive partially inserted, which prevents the 6Gb/s link from negotiating.
How often should a 10000 RPM drive like this be monitored for replacement in a server array?
Enterprise 10000 RPM drives typically run 3 to 5 years under heavy load; monitor SMART reallocated sector counts and replace proactively before predictive failure alerts trigger.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
