我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

DELL

DELL 8WP8W 600GB 10000 RPM SAS 6Gb/s 2.5" internal hard drive

SKU CH-D6BV-F94VK MPN 8WP8W

A 600 GB 10000 RPM SAS 2.5" drive built for Dell PowerEdge R710 servers

  • PackagingBare Drive
  • InterfaceSAS 6Gb/s
  • Capacity600GB
  • RPM10000 RPM
  • Average Latency6Gb/s
  • FeaturesCompatibility: Dell PowerEdge R710 Server
  • 10000 RPM spindle speed enables rapid data access
  • SAS 6Gb/s interface provides reliable server connectivity
  • 600GB capacity stores substantial enterprise workloads
  • 5 inch form factor fits dense PowerEdge R710 bays
  • Designed for server environments with Dell compatibility

Capacity and interface

This is a Dell 8WP8W 600GB internal hard drive with a SAS 6Gb/s interface and a 10000 RPM spindle speed. The 2.5 inch form factor fits compatible server bays. It is supplied as a bare drive in new condition.

Server workloads

The drive suits administrators maintaining Dell PowerEdge R710 servers that require a 6Gb/s SAS replacement drive. Environments needing a higher spindle speed or a different physical connector should look elsewhere.

SAS 6Gb/s interface

The single specification that determines fit is the SAS 6Gb/s interface. The host backplane and controller must support this exact signalling rate for the drive to operate correctly.

商品特色

  • 10000 RPM spindle speed enables rapid data access
  • SAS 6Gb/s interface provides reliable server connectivity
  • 600GB capacity stores substantial enterprise workloads
  • 5 inch form factor fits dense PowerEdge R710 bays
  • Designed for server environments with Dell compatibility

商品規格

BrandDell
Model8WP8W
PackagingBare Drive
InterfaceSAS 6Gb/s
Capacity600GB
RPM10000 RPM
Average Latency6Gb/s
FeaturesCompatibility: Dell PowerEdge R710 Server
UsageIdeal for Servers
Form Factor2.5"
出貨重量0.91 kg
包裝尺寸236 × 188 × 137 mm

商品問答

Will the 2.5" form factor fit directly into a Dell PowerEdge R710 drive bay?

The drive uses a standard 2.5" SAS form factor compatible with Dell PowerEdge R710 bays, but it ships as a bare drive without a mounting tray or caddy.

What is the correct way to connect the SAS 6Gb/s interface during installation?

Insert the drive into the server backplane so the SAS connector seats fully; the common error is leaving the drive partially inserted, which prevents the 6Gb/s link from negotiating.

How often should a 10000 RPM drive like this be monitored for replacement in a server array?

Enterprise 10000 RPM drives typically run 3 to 5 years under heavy load; monitor SMART reallocated sector counts and replace proactively before predictive failure alerts trigger.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。