暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

DELL

DELL CK3MN 2TB 2.5" SATA 7200 RPM internal hard drive

SKU CH-34EJ-D6AEJ

A 2TB 2.5" SATA internal hard drive spinning at 7200 RPM with a 6.0Gb/s interface for desktop storage

  • InterfaceSATA 6.0Gb/s
  • Capacity2TB
  • RPM7200 RPM
  • Form Factor2.5"
  • 2TB capacity stores large media libraries and backups
  • 7200 RPM spindle speed delivers responsive data access
  • SATA 6.0Gb/s interface provides fast transfer rates
  • 5-inch form factor fits compact desktop bays
  • 512n sector format ensures broad system compatibility

Dell CK3MN 2TB 2.5" SATA internal hard drive

The Dell CK3MN is a 2TB 2.5" internal hard drive with a SATA 6.0Gb/s interface spinning at 7200 RPM. It uses a 512n disk format and is supplied as a new original Dell part. The drive is designed for desktop systems that accept a 2.5" SATA device.

Sustained workload behaviour

At 7200 RPM the drive delivers consistent rotational speed for continuous read and write operations. The SATA 6.0Gb/s interface supports a 600 MB/s maximum bus transfer rate. Mechanical latency and platter density determine real-world throughput during long transfers.

Installation notes

The 2.5" form factor requires a compatible drive bay or a 3.5" adapter bracket in many desktop chassis. Hot-swap capability depends on the host backplane and caddy supporting the feature. No mounting screws or caddy are included in the package.

特長

  • 2TB capacity stores large media libraries and backups
  • 7200 RPM spindle speed delivers responsive data access
  • SATA 6.0Gb/s interface provides fast transfer rates
  • 5-inch form factor fits compact desktop bays
  • 512n sector format ensures broad system compatibility

仕様

BrandDell
ModelCK3MN
InterfaceSATA 6.0Gb/s
Capacity2TB
RPM7200 RPM
Form Factor2.5"

この商品に関する質問

How much noise and heat does the 7200 RPM drive produce when running all day?

The 7200 RPM spindle speed generates typical mechanical hard drive noise and heat; a 2.5" form factor helps it fit in tighter bays with adequate airflow.

What existing hardware is required to install this CK3MN drive?

A free 2.5" drive bay or caddy, a SATA data cable, and a SATA power connector from the power supply are needed for installation.

Will this SATA 6.0Gb/s drive work with my older SATA controller?

Yes, the SATA 6.0Gb/s interface is backward compatible with earlier SATA standards, so it will operate on older controllers at the supported speed.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。