EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
DELL
A 330 W ATX server power supply for the Dell PowerEdge 700 with 100 to 120 V or 200 to 240 V input, one cooling fan, and 20-pin ATX, 10-pin ATX, 4-pin ATX, two 4-pin Molex, and one floppy connector
This 330-watt unit is a direct replacement power supply built for the Dell PowerEdge 700 server. It accepts a wide input range of 100 to 120 volts or 200 to 240 volts and uses a single fan for cooling. The ATX form factor fits the original chassis without modification.
This supply suits administrators repairing or maintaining a Dell PowerEdge 700 that requires the exact connector layout listed. Builders working on different server models, proprietary blade chassis, or systems needing redundant hot-plug modules should look at other units.
The unit provides one 20-pin ATX connector, one 10-pin ATX connector, one 4-pin ATX connector, two 4-pin Molex connectors and one floppy power connector. Matching this exact combination to the motherboard and drive requirements is the single specification that confirms compatibility.
この商品の仕様はまだ公開されていません。
The server should power on without errors, the single cooling fan must spin, and the system BIOS should report stable 12 V and 5 V rails.
The box includes the PSU with a 20-pin ATX connector, a 10-pin ATX connector, a 4-pin ATX connector, two 4-pin Molex plugs and one floppy power lead; no additional cables are required for a standard PowerEdge 700 installation.
All four numbers refer to the same 330W ATX supply (model NPS-330GB A); any of them will fit and operate identically in the PowerEdge 700.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?