We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rectangular ATX server power supply with single fan and multiple connectors

DELL

DELL NPS-330GB 330W PowerEdge 700 power supply

SKU CH-N3HZ-YJ5Z9 MPN NPS-330GB

A 330 W ATX server power supply for the Dell PowerEdge 700 with 100 to 120 V or 200 to 240 V input, one cooling fan, and 20-pin ATX, 10-pin ATX, 4-pin ATX, two 4-pin Molex, and one floppy connector

  • 330W maximum output powers the Dell PowerEdge 700
  • Auto-switching 100-120V or 200-240V input suits global mains
  • Single fan cooling keeps temperatures controlled
  • ATX form factor fits standard server chassis
  • 20-pin ATX, 10-pin ATX, 4-pin ATX, two 4-pin Molex and floppy connectors included

Server power supply for Dell PowerEdge 700

This 330-watt unit is a direct replacement power supply built for the Dell PowerEdge 700 server. It accepts a wide input range of 100 to 120 volts or 200 to 240 volts and uses a single fan for cooling. The ATX form factor fits the original chassis without modification.

Suitable for restoring a PowerEdge 700.

This supply suits administrators repairing or maintaining a Dell PowerEdge 700 that requires the exact connector layout listed. Builders working on different server models, proprietary blade chassis, or systems needing redundant hot-plug modules should look at other units.

Connector set determines fit

The unit provides one 20-pin ATX connector, one 10-pin ATX connector, one 4-pin ATX connector, two 4-pin Molex connectors and one floppy power connector. Matching this exact combination to the motherboard and drive requirements is the single specification that confirms compatibility.

Highlights

  • 330W maximum output powers the Dell PowerEdge 700
  • Auto-switching 100-120V or 200-240V input suits global mains
  • Single fan cooling keeps temperatures controlled
  • ATX form factor fits standard server chassis
  • 20-pin ATX, 10-pin ATX, 4-pin ATX, two 4-pin Molex and floppy connectors included

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the 330W unit is running correctly once installed in my PowerEdge 700?

The server should power on without errors, the single cooling fan must spin, and the system BIOS should report stable 12 V and 5 V rails.

Which cables and connectors ship with the NPS-330GB, and what extra items might I need?

The box includes the PSU with a 20-pin ATX connector, a 10-pin ATX connector, a 4-pin ATX connector, two 4-pin Molex plugs and one floppy power lead; no additional cables are required for a standard PowerEdge 700 installation.

My PowerEdge 700 lists several part numbers — 0F1525, CN-0F1525, GD321 and F1525 — which one should I order?

All four numbers refer to the same 330W ATX supply (model NPS-330GB A); any of them will fit and operate identically in the PowerEdge 700.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.