暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5 inch SAS hard drive with hot-swap tray

DELL

DELL P2DKC 8TB 3.5" SAS 12Gb/s 7200 RPM

SKU CH-QEDF-08AYQ

An 8 TB desktop hard drive with a 12 Gb/s SAS interface, 7200 RPM speed and hot-swap 3.5" form factor

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity8TB
  • RPM7200 RPM
  • Form Factor3.5"
  • 8 TB capacity stores large data sets
  • SAS 12 Gb/s interface enables fast transfers
  • 7200 RPM spindle speed supports steady throughput
  • 5 inch form factor fits standard bays
  • Hot-swap tray allows drive changes without power-down

Dell 8TB Nearline SAS 12Gb/s Drive

This Dell P2DKC is a 3.5-inch 8TB nearline SAS hard drive spinning at 7200 RPM with a 12Gb/s interface. It is built for bulk storage in servers or workstations that accept hot-swap SAS drives. The bare-drive packaging suits integrators and IT teams refreshing Dell arrays.

Who this suits and who should look elsewhere

It suits administrators expanding nearline capacity in compatible Dell PowerEdge or Precision systems with SAS backplanes and hot-swap bays. Buyers whose chassis or controller only support slower SAS speeds, smaller form factors, or non-hot-swap caddies should look elsewhere.

The deciding specification

The 12Gb/s SAS interface is the single specification that decides fitment; the drive will only operate at full speed when connected to a 12Gb/s SAS controller and backplane.

特長

  • 8 TB capacity stores large data sets
  • SAS 12 Gb/s interface enables fast transfers
  • 7200 RPM spindle speed supports steady throughput
  • 5 inch form factor fits standard bays
  • Hot-swap tray allows drive changes without power-down

仕様

BrandDell
ModelP2DKC
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity8TB
RPM7200 RPM
Form Factor3.5"

この商品に関する質問

Does the 3.5" SAS drive fit a standard hot-swap tray?

Yes, the 3.5" form factor matches standard SAS hot-swap bays and the drive is built for hot-swap use.

What is the correct way to install the drive in a hot-swap bay?

Insert the drive firmly until the SAS connector seats fully; the common error is stopping before the latch clicks.

How often should the 7200 RPM drive be replaced in a nearline workload?

Plan replacement around the manufacturer's rated annualised failure rate for 7.2K nearline drives, typically after three to five years of continuous operation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。