暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Half-height blade server, matte black finish, two drive bays visible

DELL

DELL PowerEdge M640 Blade Server 2x Xeon Platinum 8260 24-Core 2.4GHz 16GB DDR4 2x 960GB SSD

SKU CH-ZFR0-EH7F5

Half-height blade server with dual 24-core Xeon Platinum 8260 processors at 2.4 GHz, 16 GB DDR4 ECC memory and two 960 GB SATA SSDs on a PERC S140 controller

  • TypeBlade
  • Rack HeightBlade
  • CPU TypeIntel Xeon
  • CPU Speed2.40 GHz
  • CPU SocketLGA 3647
  • Number of CPU Cores24-Core Processor

Installed Memory Size 16GB

SSD (Installed) 2 x 960GB SATA SSD

  • Dual 24-core Xeon Platinum 8260 CPUs deliver 56 total threads for heavy workloads
  • 16 GB DDR4 ECC memory supports error-correcting performance across 16 available slots
  • Dual 960 GB SATA SSDs with PERC S140 controller enable RAID 0/1/5/10 flexibility
  • Integrated 10 Gb dual-port network daughter card provides high-speed blade connectivity
  • iDRAC9 Enterprise remote management simplifies administration across the chassis

Dual Xeon 8260 blade server

The Dell PowerEdge M640 is a half-height blade server built for dense compute environments. Two Intel Xeon Platinum 8260 processors run at 2.4 GHz with a 3.9 GHz turbo frequency, providing 24 cores per socket. Sixteen gigabytes of DDR4 memory and dual 960 GB SATA SSDs complete the base configuration.

Suits virtualization and HPC clusters

This server fits workloads that demand high core counts in a compact blade form factor, such as virtualization farms and high-performance computing clusters. Buyers who need more than 16 GB of memory or who require GPU acceleration should look at other configurations.

Max memory capacity 2 TB

The board supports up to 2 TB of DDR4 across 16 slots, making memory expansion the key specification for scaling this blade. The PERC S140 controller manages the installed SSDs and additional SATA or SAS drives with RAID 0, 1, 5 or 10.

特長

  • Dual 24-core Xeon Platinum 8260 CPUs deliver 56 total threads for heavy workloads
  • 16 GB DDR4 ECC memory supports error-correcting performance across 16 available slots
  • Dual 960 GB SATA SSDs with PERC S140 controller enable RAID 0/1/5/10 flexibility
  • Integrated 10 Gb dual-port network daughter card provides high-speed blade connectivity
  • iDRAC9 Enterprise remote management simplifies administration across the chassis

仕様

BrandDELL
SeriesPowerEdge M640
TypeBlade
Rack HeightBlade
CPU TypeIntel Xeon
CPU Speed2.40 GHz
CPU SocketLGA 3647
Number of CPU Cores24-Core Processor
# of Processors Installed2
MAX Processors2
Installed Memory Size16GB
Memory TypeDDR4
Max Memory Capacity2TB
Number of Memory Slots16
Storage ControllerDell Perc S140 Controller
HDD InterfaceSATA/SAS
SSD (Installed)2 x 960GB SATA SSD
Raid LevelRAID 0/1/5/10
GPU TypeMatrox G200
Video Memory8MB
Ethernet ControllerDell Broadcom 57810S-K 10Gb Dual Port Blade Network Daughter Card
Management PortRJ 45
Operating SystemNo

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What PCIe interface does the PERC S140 controller use and what throughput does it cap at?

The PERC S140 is an integrated SATA controller that operates over the chipset PCIe lanes; it supports SATA 6 Gb/s per port, so each attached SSD is limited to that bus speed.

What chassis and slot size does this half-height blade require?

It fits a half-height slot in a Dell PowerEdge MX or M1000e chassis; the blade accepts two 2.5-inch drives and includes a Broadcom 57810S-K dual-port 10 Gb daughter card.

How is the blade installed and what step is often missed?

Slide the blade into the chassis until the latch engages, then use the iDRAC9 Enterprise interface to complete BIOS and RAID configuration before powering on the operating system installer.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。