暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5 inch SAS hard drive with exposed circuit board

DELL

DELL ST8000NM0185 8TB 7200RPM 12Gb/s SAS internal hard drive

SKU CH-JC0Q-APGYZ

An 8 TB 3.5-inch SAS drive spinning at 7200 RPM with a 512 MB cache for high-capacity server storage

  • 8 TB capacity for large-scale storage needs
  • 7200 RPM spindle speed for responsive data access
  • 12 Gb/s SAS interface for high-throughput connectivity
  • 512 MB cache buffer for improved I/O performance
  • 5 inch form factor fits standard server drive bays

Dell 8 TB 12 Gb/s SAS hard drive

This Dell EXOS 7E8 drive delivers 8 TB of storage on a 3.5 inch SAS 12 Gb/s interface. It spins at 7200 RPM and provides a 512 MB buffer for sustained throughput. The unit is new and built for compatible Dell PowerEdge servers and storage arrays. It installs directly into supported 3.5 inch drive bays with the correct caddy.

Who this suits and who should look elsewhere

The drive fits Dell servers such as the T130, T330, T440, T630, T640, R230, R330, R430, R530, R630, R730, R730xd, R830, R930 and the MD1200, MD1220, ME4012 and ME4024 storage platforms. Buyers who need a different interface or a form factor other than 3.5 inch should look elsewhere. Systems without a SAS backplane or without the required Dell caddy cannot use this drive.

Deciding specification

The single specification that decides fitment is the 12 Gb/s SAS interface combined with the Dell 3.5 inch caddy requirement. Only servers and enclosures listed in the compatibility list can accept this drive. Verify the exact model number ST8000NM0185 against your hardware before purchase.

特長

  • 8 TB capacity for large-scale storage needs
  • 7200 RPM spindle speed for responsive data access
  • 12 Gb/s SAS interface for high-throughput connectivity
  • 512 MB cache buffer for improved I/O performance
  • 5 inch form factor fits standard server drive bays

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Will the 3.5" SAS drive fit in a standard 3.5-inch bay?

The drive uses the 3.5-inch form factor and mounts in any standard 3.5-inch bay with four side screws.

How do I install the 12Gb/s SAS drive in a Dell server?

Slide the drive into a compatible Dell caddy, secure it with the caddy screws, then insert the assembly into the server bay until the latch clicks.

When should I replace the 7200RPM SAS drive?

Replace the drive if SMART reports reallocated sectors, seek errors rise, or the 512MB cache can no longer mask latency during heavy workloads.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。