暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

DELL

DELL ST900MM0006 900GB 10000RPM 64MB 2.5" SAS internal hard drive

SKU CH-1C3E-9PMWQ

A 900 GB 10 000 RPM SAS drive with 64 MB cache, supplied in a 2.5 inch caddy for PowerEdge servers

  • 900 GB capacity supports large server workloads
  • 10000 RPM spindle delivers fast data access
  • 64 MB cache smooths burst I/O operations
  • SAS 6 Gb/s interface connects to compatible PowerEdge servers
  • Includes 2.5 inch caddy for direct rack mounting

900 GB 10K SAS drive with tray

This new 2.5-inch SAS hard drive delivers 900 GB of storage at 10,000 RPM with a 64 MB buffer. It uses a 6 Gb/s SAS interface and ships with a Dell PowerEdge caddy for direct installation in compatible server bays. The drive is built for internal use in enterprise environments.

Suited for PowerEdge server upgrades

It fits a wide range of PowerEdge models including the R610, R710, R720, R820, M610, M910, T610 and T710 among others listed by the manufacturer. It is not for systems that lack a 2.5-inch SAS backplane or that cannot accept a 10K RPM mechanical drive. Buyers needing higher capacity or solid-state speed should look at something else.

6 Gb/s SAS interface decides fit

The single specification that determines compatibility is the 6 Gb/s SAS connection. Your server or storage array must provide a matching SAS port and 2.5-inch bay with the correct caddy mounting points. Without that interface the drive will not function.

特長

  • 900 GB capacity supports large server workloads
  • 10000 RPM spindle delivers fast data access
  • 64 MB cache smooths burst I/O operations
  • SAS 6 Gb/s interface connects to compatible PowerEdge servers
  • Includes 2.5 inch caddy for direct rack mounting

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Does my server need a 2.5" SAS 6Gb/s backplane to use this drive?

Yes, the drive uses a 2.5" SAS 6Gb/s interface and fits the caddy included for compatible PowerEdge servers.

Will the ST900MM0006 work in a PowerEdge R710 that currently has 10000RPM SAS drives?

The R710 is listed as compatible and the drive matches the 10000RPM speed and SAS 6Gb/s interface of existing drives.

How can I confirm the drive is recognised at 6Gb/s after installation?

Check the RAID controller BIOS or iDRAC; it should report the drive as a 900GB SAS device negotiating at 6Gb/s.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。