暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

DELL

DELL THGNN 4TB 7200 RPM SATA 3.5" internal hard drive

SKU CH-4YHE-3H3VR

4 TB desktop hard drive with 7200 RPM SATA 6.0 Gb/s interface in a 3.5-inch form factor

  • InterfaceSATA 6.0Gb/s
  • Capacity4TB
  • RPM7200 RPM
  • Form Factor3.5"
  • 4 TB capacity stores large media libraries and backups
  • 7200 RPM spindle delivers responsive read and write speeds
  • SATA 6.0 Gb/s interface ensures broad desktop compatibility
  • 5-inch form factor fits standard drive bays and trays
  • New condition provides a clean, unused drive for reliable deployment

Dell THGNN 4 TB 7200 RPM SATA drive

This 3.5-inch internal hard drive provides 4 TB of storage on a SATA 6.0 Gb/s interface. It is built for desktop systems that need high-capacity bulk storage at a 7200 RPM spindle speed.

Capacity and headroom

Four terabytes hold large media libraries, backups and archives with room to grow. Sequential throughput is limited by the SATA 6.0 Gb/s link, so sustained transfers top out around the interface ceiling rather than the platters.

Thermals noise and power

A 7200 RPM mechanical drive generates audible seek noise and measurable heat under continuous load. Typical desktop airflow keeps temperatures in a safe range without extra cooling. Power draw rises during spin-up and heavy write sessions but stays within standard SATA limits.

特長

  • 4 TB capacity stores large media libraries and backups
  • 7200 RPM spindle delivers responsive read and write speeds
  • SATA 6.0 Gb/s interface ensures broad desktop compatibility
  • 5-inch form factor fits standard drive bays and trays
  • New condition provides a clean, unused drive for reliable deployment

仕様

InterfaceSATA 6.0Gb/s
Capacity4TB
RPM7200 RPM
Form Factor3.5"

この商品に関する質問

Will this 3.5" 7200 RPM SATA 6.0Gb/s drive work in an older desktop that only supports SATA 3.0Gb/s?

Yes, the SATA 6.0Gb/s interface is backward compatible with SATA 3.0Gb/s ports, so the drive will operate at the slower speed.

How can I verify the 4TB capacity and 7200 RPM speed are recognised correctly after installation?

Check the drive properties in your operating system or BIOS; they should report 4TB capacity and the SATA 6.0Gb/s link speed.

Does the retail kit include mounting screws and a SATA data cable, or must I buy them separately?

The kit contains the 3.5" hard drive only; mounting screws and a SATA data cable are not included and must be purchased separately.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。