暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver aluminium 2U server heatsink with embedded heatpipes and stacked fins

Dynatron

Dynatron A53 2U CPU cooler for AMD EPYC SP6

SKU CH-HXXM-P8HR1

A 2U air cooler with aluminium stacked fins and embedded heatpipes for AMD EPYC SP6 processors

  • Designed for AMD EPYC SP6 processors
  • 2U server height fits dense rack builds
  • Aluminium stacked fins with embedded heatpipes spread heat fast
  • Lightweight aluminium base eases mounting pressure
  • 53 mm fin height maximises airflow in tight chassis

Dynatron A53 2U SP6 cooler

The Dynatron A53 is a 2U aluminium stacked-fin heatsink with embedded heatpipes designed for AMD EPYC processors on the SP6 socket. It targets server builders and integrators who need reliable thermal performance within a two-rack-unit chassis height.

Replaces stock or lower-profile coolers

This cooler replaces basic heat sinks or lower-profile units when thermal headroom is required for sustained workloads in 2U or taller enclosures. The jump is worthwhile when the existing solution cannot maintain acceptable temperatures under continuous load.

Verify SP6 socket and 2U clearance

Confirm the motherboard uses the SP6 socket and that the chassis provides at least 2U of vertical space for the heatsink. Ensure mounting hole alignment matches the SP6 pattern and that airflow direction suits the system layout.

特長

  • Designed for AMD EPYC SP6 processors
  • 2U server height fits dense rack builds
  • Aluminium stacked fins with embedded heatpipes spread heat fast
  • Lightweight aluminium base eases mounting pressure
  • 53 mm fin height maximises airflow in tight chassis

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Does the 2U height fit my rack chassis?

The cooler is built to a 2U profile so it fits standard 2U and taller server chassis.

How do I mount it on the SP6 socket and what step is often missed?

Align the heatsink with the SP6 mounting holes, secure the supplied brackets, then apply even pressure when tightening the screws to avoid uneven contact.

Will the aluminum fins or heatpipes need replacement later?

The aluminum stacked fins and embedded heatpipes are passive components with no moving parts, so they do not require scheduled replacement.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。