暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Compact silver heatsink with vapor chamber base and stacked aluminum fins

Dynatron

Dynatron R23 CPU cooler 5.25"x4.25"x3.5" 0.97 lbs

SKU CH-C10Y-38PPV MPN R23

A vapor-chamber heatsink with stacked aluminium fins measuring 5.25 by 4.25 by 3.5 inches and weighing 0.97 lbs

  • TypeHeatsinks only
  • Heatsink MaterialVapor Chamber Base with AluminumStacked Fin
  • Heatsink Dimensions5.25"x4.25"x3.5"
  • Weight0.97 lbs
  • Vapor chamber base spreads heat rapidly from the CPU
  • Stacked aluminium fins increase surface area for efficient passive dissipation
  • Compact 5.25" x 4.25" x 3.5" footprint fits tight chassis spaces
  • Light 0.97 lbs weight reduces motherboard mounting stress
  • Heatsink-only design allows custom fan selection for noise or airflow priorities

Vapor chamber heatsink

The Dynatron R23 is a CPU air cooler built around a vapor chamber base paired with aluminum stacked fins. It measures 5.25 by 4.25 by 3.5 inches and weighs .97 lbs. The unit is supplied as a heatsink only, without an integrated fan. This design targets systems where a separate airflow solution is preferred.

Passive cooling builds

The heatsink suits builders assembling passively cooled or semi-passive workstations who will add their own fan or rely on chassis airflow. It also fits replacement scenarios where the original mounting hardware is retained. Buyers needing an all-in-one cooler with a pre-installed fan should look elsewhere.

Vapor chamber base

The defining specification is the vapor chamber base combined with aluminum stacked fins, which spreads heat from the CPU lid into the fin array. This construction determines the thermal capacity available before active airflow is added. Verify that your socket mounting pattern matches the heatsink footprint before purchase.

特長

  • Vapor chamber base spreads heat rapidly from the CPU
  • Stacked aluminium fins increase surface area for efficient passive dissipation
  • Compact 5.25" x 4.25" x 3.5" footprint fits tight chassis spaces
  • Light 0.97 lbs weight reduces motherboard mounting stress
  • Heatsink-only design allows custom fan selection for noise or airflow priorities

仕様

BrandDynatron
ModelR23
TypeHeatsinks only
Heatsink MaterialVapor Chamber Base with AluminumStacked Fin
Heatsink Dimensions5.25"x4.25"x3.5"
Weight0.97 lbs
配送重量0.44 kg
梱包サイズ132 × 112 × 91 mm

この商品に関する質問

What mounting hardware is required to install the R23 heatsink on my CPU socket?

The R23 is supplied as a heatsink only; you must provide the correct retention brackets, back-plate and screws that match your specific motherboard socket.

Will the R23's 5.25 by 4.25 inch footprint clear tall RAM modules or VRM heatsinks on an older board?

At 5.25 by 4.25 inches the base covers a large area; measure the space around your socket to confirm clearance for memory sticks and voltage-regulator coolers.

How can I verify the vapor chamber base is making proper contact after mounting the R23?

Check that idle and load temperatures drop to expected levels for your CPU and that the heatsink feels evenly warm across the fin stack during operation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。