暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Clear Crystal01 filament spool, 2.85mm diameter, 750g weight

E3D Online

E3D Online spoolWorks EDGE Filament 2.85mm 750g Clear Crystal01 3d printers accessory

SKU CH-GEEJ-278SK

Recyclable PETG-based filament prints without fumes, resists warping, and bonds layers almost as strongly as solid material

  • TypeFilament
  • Recyclable PETG-based material reduces environmental impact
  • Easy printing with no unpleasant fumes or odours
  • Strong tough naturally glossy finish for durable parts
  • Adheres to bed surfaces with just a little gluestick
  • Pairs with Scaffold support for clean breakaway removal

Filament for strong functional prints

E3D spoolWorks EDGE is a PETG-based filament engineered for 3D printers that need tough, accurate parts. It blends the resilience of ABS with the easy handling of PLA, giving makers a material that prints cleanly without strong fumes. The 2.85mm diameter suits printers built for that format. The 750g spool provides enough length for multiple medium-sized jobs.

Low contraction limits warp on large models

Edge was developed to nearly eliminate contraction, so wide flat surfaces and tall walls stay flat during cooling. Its managed viscosity and melt strength let you print steep overhangs and tight bridges that would sag on standard PETG. Bed adhesion works reliably with only a light gluestick coating, removing the need for specialised surface sheets or high bed temperatures.

750g spool covers many functional prototypes

The spool holds sufficient material for iterative brackets, enclosures and mechanical test pieces before a changeover is needed. It pairs with E3D Scaffold support filament for clean breakaway on complex geometries, reducing post-processing time. Parts printed with Edge achieve near-isotropic strength, so load-bearing features perform consistently across layer lines. Buyers who need higher-temperature resistance or a different diameter should check alternative materials.

特長

  • Recyclable PETG-based material reduces environmental impact
  • Easy printing with no unpleasant fumes or odours
  • Strong tough naturally glossy finish for durable parts
  • Adheres to bed surfaces with just a little gluestick
  • Pairs with Scaffold support for clean breakaway removal

仕様

ModelEdge
TypeFilament

この商品に関する質問

Is the 750 g spool in 2.85 mm the only size this Edge filament comes in?

This listing supplies a single 750 g spool of 2.85 mm Edge filament; other diameters or weights are not included here.

What does the 2.85 mm diameter mean when the filament is loaded in my printer?

The 2.85 mm diameter matches printers designed for that thicker filament format, so the extruder gear grips and pushes it without modification.

Which material standard does Edge follow, and what printing temperature does that set?

Edge is a PETG-based filament modified for extra toughness, so it prints at typical PETG temperatures while giving stronger layer adhesion and less warp.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。