暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Spool of dark translucent 3D printing filament

E3D Online

E3D Online spoolWorks EDGE Filament 2.85mm 750g Dark Crystal12 3d printers accessory

SKU CH-4FT1-FRYGM

PETG-based filament offers ABS-like toughness with PLA ease, low warp, strong layer adhesion, and gluestick bed grip in a 2.85 mm, 750 g spool

  • TypeFilament
  • Recyclable PETG-based material reduces environmental impact
  • Easy printing without unpleasant fumes or odours
  • Strong, tough filament with naturally glossy finish
  • Adheres to bed surfaces using only a little gluestick
  • Pairs with Scaffold support for clean breakaway adhesion

Edge PETG-based Filament

Edge is a PETG-based filament developed in-house by E3D Online as part of the SpoolWorks range. It combines the toughness of ABS with the printing ease of PLA for superior processing properties. The material features super-low contraction to nearly eliminate warping during prints.

Recyclable Material Benefits

The filament is widely recyclable and modified for exceptional toughness and resilience. It prints with no unpleasant fumes or odors and produces a naturally glossy, shiny surface finish. Parts achieve incredible layer adhesion at a molecular level for near-isotropic strength.

2.85mm Diameter 750g Spool

The 2.85mm diameter suits compatible extruders and the 750g spool provides sufficient length for multiple projects. It adheres effectively to bed surfaces with only a small amount of gluestick. The material pairs with Scaffold support material for reliable adhesion and clean breakaway support removal.

特長

  • Recyclable PETG-based material reduces environmental impact
  • Easy printing without unpleasant fumes or odours
  • Strong, tough filament with naturally glossy finish
  • Adheres to bed surfaces using only a little gluestick
  • Pairs with Scaffold support for clean breakaway adhesion

仕様

ModelEdge
TypeFilament

この商品に関する質問

Does the 750 g spool of 2.85 mm Edge filament need any special storage to stay printable?

Keep the spool in a sealed bag with desiccant; the PETG-based material absorbs moisture over time and will bubble or lose layer adhesion if printed damp.

What print-speed limit appears first when running long jobs with this Edge filament?

The super-low contraction lets you push speed until the hot-end melt-rate or part-cooling capacity is reached, not warp or layer-splitting.

How much heat and smell does the 2.85 mm Edge filament produce during all-day printing?

It prints at typical PETG temperatures with no unpleasant fumes or odours, so ambient heat rise and smell stay low even on extended runs.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。