暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black flexible TPU filament spool, 2.85mm diameter, 500g weight

E3D Online

E3D Online spoolWorks FleXD TPU Filament 2.85mm 500g Black 3d printers accessory

SKU CH-XA63-YQFYB

Semi-flexible TPU filament for shock-absorbing prints, printing at 220-240 °C with 15 mm/s speed and 45-85 °C bed temperature

  • ColorBlack
  • TypeFilament
  • Easy to print with a 2.85 mm diameter
  • High shear strength for durable functional parts
  • High abrasion resistance extends component life
  • Elastic flexibility suits shock-absorbing prints
  • Prints at 220-240 °C with 45-85 °C bed

E3D spoolWorks FleXD TPU Filament 2.85mm

This genuine E3D spoolWorks FleXD is a semi-flexible TPU filament supplied in a 500g spool with a 2.85mm diameter. It prints at 220-240°C with a bed temperature of 45-85°C and a recommended speed of 15mm/s. The material delivers high abrasion resistance and high shear strength for durable parts.

Makers needing elastic, abrasion-resistant prints

The filament suits users printing phone covers, keyboard protectors, insoles or flexible models such as vases and benchys. It works with spoolWorks Scaffold support that peels away and dissolves in tap water. Buyers who require a rigid structural material or a different diameter should look elsewhere.

Check printer compatibility before ordering

Verify that your 3D printer accepts 2.85mm filament and can reach the stated nozzle and bed temperature ranges. A glue stick is recommended for bed adhesion. All printers are unique so adjust settings to taste for best results.

特長

  • Easy to print with a 2.85 mm diameter
  • High shear strength for durable functional parts
  • High abrasion resistance extends component life
  • Elastic flexibility suits shock-absorbing prints
  • Prints at 220-240 °C with 45-85 °C bed

仕様

BrandE3D
ModelFleXD
ColorBlack
TypeFilament

この商品に関する質問

Does my printer need a 2.85 mm filament path and a hot-end that reaches 220-240 °C?

Yes, this spool is 2.85 mm diameter and prints at 220-240 °C, so the extruder and hot-end must accept that size and temperature range.

Will a heated bed limited to 45-85 °C work with this material?

The recommended bed range is 45-85 °C, so any printer whose bed reaches that window can use FleXD with a glue-stick layer for adhesion.

How can I confirm the filament is feeding correctly after loading?

At the suggested 30 % speed (15 mm/s) you should see smooth, consistent extrusion without grinding or slipping, and the first layers should stick firmly to the glue-coated bed.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。