暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
A spool of olive-grey ASA filament in matte satin finish

E3D Online

E3D Online spoolWorks MatX ASA Filament 2.85mm 750g Olive Grey09 3d printers accessory

SKU CH-A2X0-512TV

Strong, tough ASA filament replaces ABS with a smooth satin finish, offers accurate printing down to 0.15 mm nozzles and pairs with Scaffold Snap support material

  • ColorGray
  • TypeFilament
  • Strong ASA filament prints easily with exceptional flow properties
  • Smooth satin finish replaces ABS with improved layer adhesion
  • Pairs with Scaffold Snap support for clean breakaway adhesion
  • Accurate detail printing works down to 0.15 mm nozzles
  • Ten times the weathering resistance of standard ABS material

Strong ASA filament for functional prints

E3D spoolWorks MatX is a 2.85mm ASA filament supplied on a 750g spool in Olive Grey09. It serves as a drop-in replacement for ABS with a smooth satin finish and improved layer adhesion. Makers printing outdoor parts or chemically resistant components will benefit from its weathering resistance.

Straightforward printing with precise flow

The material offers exceptional flow properties that enable highly accurate printing even through tiny nozzles such as a 0.15mm diameter. It pairs with Scaffold Snap support material for reliable adhesion and clean breakaway. Poor bed adhesion or warping can occur if the build surface is not suited to ASA.

Check diameter compatibility and enclosure

Verify that your printer accepts 2.85mm filament before ordering. An actively heated enclosure is recommended to manage the higher long-term heat resistance of ASA. Ensure your slicer profile matches the material's flow characteristics for best results.

特長

  • Strong ASA filament prints easily with exceptional flow properties
  • Smooth satin finish replaces ABS with improved layer adhesion
  • Pairs with Scaffold Snap support for clean breakaway adhesion
  • Accurate detail printing works down to 0.15 mm nozzles
  • Ten times the weathering resistance of standard ABS material

仕様

BrandE3D
ModelMatX
ColorGray
TypeFilament

この商品に関する質問

How can I confirm the MatX ASA filament is printing correctly with a 0.15mm nozzle?

Successful prints will show a smooth satin finish, strong layer adhesion, and accurate detail reproduction, especially on small features suited to the 0.15mm nozzle.

What comes with the 750g spool and what must I purchase separately for dual-material prints?

The box contains one 750g spool of 2.85mm Olive Grey MatX ASA filament; Scaffold Snap support material must be bought separately for breakaway supports.

Which diameter and weight combination should I select for a printer that takes 2.85mm filament?

Choose the 2.85mm diameter in the 750g spool size, as this is the specific combination offered for compatible printers.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。