暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black plastic bracket with open-faced bezel to mount a 3.5-inch drive in a 5.25-inch bay

EN-Labs

EN-Labs BR-3.5-5.25 3.5 to 5.25 Floppy Drive Bay Adapter

SKU CH-VVKC-TXJE7

A plastic bracket that mounts a 3.5-inch floppy drive into a 5.25-inch optical bay, including eight screws for a secure fit

  • FeaturesThis plastic, floppy-drive adapter bracket lets you install
  • Package ContentsPackage Content 1 - piece 3.5" to 5.25" bracket 8 - pieces s
  • Install a 3.5-inch floppy drive in a 5.25-inch bay
  • Open-faced black bezel gives a snug secured fit
  • Quick and easy installation with included screws
  • Mount front panels card readers or fan controllers
  • Maximise internal case space by using empty optical bays

3.5-to-5.25 Bay Adapter

This plastic bracket converts a standard 5.25-inch optical drive bay so it can accept a 3.5-inch floppy drive or similarly sized front-panel device. It is intended for builders who need to relocate a legacy drive or add a card reader, USB hub or fan controller where a full-height bay sits empty.

Capacity and headroom

The adapter holds one 3.5-inch unit securely behind an open-faced black bezel, using the eight screws supplied. It cannot accommodate a 5.25-inch drive, nor does it provide mounting points for 2.5-inch units without a separate caddy.

5.25-inch bay constraint

Installation is limited to cases that still include a 5.25-inch internal bay, a form factor omitted from many modern chassis. The bracket adds no electrical connections, so the mounted device must reach the motherboard or controller with its own cables.

特長

  • Install a 3.5-inch floppy drive in a 5.25-inch bay
  • Open-faced black bezel gives a snug secured fit
  • Quick and easy installation with included screws
  • Mount front panels card readers or fan controllers
  • Maximise internal case space by using empty optical bays

仕様

BrandEN-Labs
ModelBR-3.5-5.25
FeaturesThis plastic, floppy-drive adapter bracket lets you install a 3.5-inch floppy drive into a 5.25-inch opical drive CD-ROM bay.
A simple solution that lets you position a 3.5in floppy drive in a computer case as needed (without being confined to the 3.5in floppy bay determined by the case layout), such as 3.5" internal multi- function front panel,card reader, USB hub,fan speed controller etc.
The floppy drive adapter bracket features an attractive open-faced black bezel that provides a snug, secured fit for installed drives.
Package ContentsPackage Content
1 - piece 3.5" to 5.25" bracket
8 - pieces screws

この商品に関する質問

Will the 3.5-inch floppy drive fit my older 5.25-inch bay?

Yes, the plastic bracket converts any 5.25-inch optical bay so a 3.5-inch floppy drive mounts securely.

How can I confirm the adapter is installed correctly?

The black bezel sits flush with the front panel and the drive does not wobble when the eight supplied screws are tightened.

What comes in the box and what must I buy separately?

The box contains one 3.5-to-5.25 bracket and eight mounting screws; the floppy drive itself is not included.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。