暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black ABS bracket converts a 5.25 inch bay to 2.5 or 3.5 inch drive plus 12cm fan mount

EN-Labs

EN-Labs INBR52512CMFAN 5.25 to 2.5 or 3.5 hard drive adapter with 12cm fan mount

SKU CH-78QY-PHHSA

Converts a 5.25" bay to hold one 2.5" or 3.5" SATA or SAS drive plus a 12 cm cooling fan

  • FeaturesSupports computer cases with an available 5.25 inch drive ba
  • Mount 2.5 or 3.5 drives in a 5.25 bay
  • Add a 12cm fan directly under the drive for active cooling
  • ABS plastic body keeps weight low and resists heat
  • Eight screws included for fast tool-free fitting
  • Compact 145 x 120 x .31 inch tray fits tight builds

Drive-bay adapter with fan mount

This EN-Labs adapter fits a 5.25-inch drive bay and accepts either a 2.5-inch or 3.5-inch SATA or SAS drive. It also provides a mounting point for a 12-centimetre cooling fan directly beneath the installed drive. The bracket is moulded from black ABS plastic and ships with eight mounting screws for quick installation.

Single-drive constraint

The tray holds exactly one drive at a time; a 2.5-inch SSD and a 3.5-inch HDD cannot be fitted simultaneously. Builders who need to run both a 2.5-inch and a 3.5-inch device must use two separate adapters or a different bay solution.

Sustained-load cooling

Mounting a 12-centimetre fan underneath the drive creates direct airflow across the drive surface during prolonged read or write sessions. This active cooling helps maintain consistent operating temperatures when the drive is under continuous load rather than brief bursts.

特長

  • Mount 2.5 or 3.5 drives in a 5.25 bay
  • Add a 12cm fan directly under the drive for active cooling
  • ABS plastic body keeps weight low and resists heat
  • Eight screws included for fast tool-free fitting
  • Compact 145 x 120 x .31 inch tray fits tight builds

仕様

BrandEN-Labs
ModelINBR52512CMFAN
FeaturesSupports computer cases with an available 5.25 inch drive bay to Mount 1x 2.5“ OR 3.5" Drive and extra 12CM fan for cooling Can not mount a 2.5" SSD and a 3.5" HDD at the same time! Allow to Mount 1x 3.5 - inch(or 2.5 inch or SSD)Drive and 1x 12cm fan at the same time! Compatible with any 2.5 or 3.5 inch IDE,SATA or SAS Hard Drive and Solid State Disk,Converts an available 5.25" HDD bay drive to accommodate 3.5" HDD or 2.5'' SSD (Solid State Drive) Made of ABS(Acrylonitrile Butadiene Styrene) plastic body; quick and easy installation Above Install hard disk , below install the fan. D

この商品に関する質問

Does the adapter let me keep using a 3.5" SATA drive and a 12 cm fan together in the same 5.25" bay?

Yes, the bracket is designed to hold one 3.5" drive and one 12 cm fan simultaneously, with the drive above and the fan below.

Which drive interfaces does the bracket accept when converting a 5.25" bay?

It works with any 2.5" or 3.5" IDE, SATA or SAS hard drive or solid-state disk, converting the bay without changing the drive's native connection.

What are the exact outer dimensions of the bracket so I can check clearance in my case?

The bracket measures 145 x 120 x 8 mm, which is approximately 5.71 x 4.72 x 0.31 inches overall.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。