暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5 inch hard drive with green circuit board exposed

Epoch

Epoch 8TB 7200RPM SATA 3.5" Internal Hard Drive Replacement Kit

SKU CH-X399-E5DZK

8 TB 3.5-inch SATA hard drive spinning at 7200 RPM, supplied as a replacement kit for Dell PowerEdge 14 and 15 generation servers

  • InterfaceSATA
  • Capacity8TB
  • RPM7200 RPM
  • UsageIdeal for Servers
  • Form Factor3.5"
  • 8TB capacity stores large server datasets
  • 7200 RPM spindle speed delivers fast data access
  • SATA 6Gb/s interface ensures broad compatibility
  • 5 inch form factor fits standard drive bays
  • Compatible with Dell PowerEdge 14 and 15 generation servers

Purpose-built server storage

The Epoch 8TB 7200RPM SATA 3.5" drive is engineered for Dell PowerEdge 14 and 15 Generation servers as well as Dell Tower 15 Generation servers. It delivers high-capacity bulk storage for RAID arrays, backup targets and archival workloads in compatible R240 through R940xa and T150 through T550 platforms.

Thermals and power profile

The 7200 RPM spindle and SATA 6Gb/s interface operate within standard enterprise drive power envelopes for 3.5" bays. Acoustic output and thermal load match expectations for always-on server deployments where drives run continuously under controlled airflow.

The deciding specification

Compatibility is limited to the listed Dell PowerEdge 14 Generation, 15 Generation and Tower 15 Generation models; the drive will not function in systems outside this validated matrix. Buyers who need support for non-Dell servers or earlier generation hardware should select a different drive.

特長

  • 8TB capacity stores large server datasets
  • 7200 RPM spindle speed delivers fast data access
  • SATA 6Gb/s interface ensures broad compatibility
  • 5 inch form factor fits standard drive bays
  • Compatible with Dell PowerEdge 14 and 15 generation servers

仕様

InterfaceSATA
Capacity8TB
RPM7200 RPM
UsageIdeal for Servers
Form Factor3.5"

この商品に関する質問

How do I install the 3.5" SATA drive in a Dell PowerEdge R740 server, and what step is often missed?

Slide the drive into the hot-swap bay until the carrier clicks, then secure the latch; the step often missed is fully engaging the latch so the SATA connector seats on the backplane.

What maintenance or replacement will the 7200 RPM SATA drive need later?

Mechanical drives can develop bad sectors over time; run SMART checks periodically and replace the unit if reallocated-sector counts rise.

What limit appears first on the 8TB SATA drive during sustained write workloads?

The 6 Gb/s SATA interface caps sustained throughput, so sequential write speed will plateau at the link limit before the 7200 RPM media saturates.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。