暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 1.75 mm PLA filament spool with glossy silk finish

eSUN

eSUN Silk PLA Filament 1.75mm 1KG Sliver 3d printers accessory

SKU CH-PSWX-R854D

Silk PLA filament with a shiny, pearlescent finish, ±0.05 mm dimensional accuracy and tangle-free 1.75 mm spool for smooth, clog-free printing

  • ColorSliver
  • Type3D Printing Filament
  • Specification3D
  • FeaturesStable Dimensional Tolerance
  • Silky shiny finish needs no polishing
  • Dimensional tolerance ±0.05 mm ensures consistent feeding
  • Tangle-free spool feeds smoothly without nozzle clogging
  • Prints at 40–100 mm/s with 190–230 °C nozzle temp
  • Vacuum-sealed pack with desiccant keeps filament dry

Silk PLA finish

eSUN Silk PLA filament delivers a shiny, pearly surface straight from the nozzle so printed parts need no polishing. The 1.75 mm diameter spool weighs 1 kg and suits hobbyists and makers who want eye-catching models without post-processing. It works on any FDM printer that accepts standard PLA diameters.

Thermal behaviour

The material prints between 190 and 230 °C with a recommended hot-end temperature of 210 °C and a heated bed at 45 to 60 °C. Cooling fan runs at 100 % for clean overhangs, while low warping and minimal shrinkage keep dimensions steady during long prints. Low odour and low fume output make it suitable for home or classroom use.

Bundled accessories

Each spool ships in a vacuum-sealed bag with desiccant and a product manual to preserve dryness and prevent tangles. The packaging keeps filament ready to feed without moisture-related popping or nozzle clogs. A printed guide lists the recommended temperatures, speeds and bed surfaces for quick setup.

特長

  • Silky shiny finish needs no polishing
  • Dimensional tolerance ±0.05 mm ensures consistent feeding
  • Tangle-free spool feeds smoothly without nozzle clogging
  • Prints at 40–100 mm/s with 190–230 °C nozzle temp
  • Vacuum-sealed pack with desiccant keeps filament dry

仕様

BrandeSUN
ModelPLA Filament
ColorSliver
Type3D Printing Filament
Specification3D
FeaturesStable Dimensional Tolerance

この商品に関する質問

How do I load the 1.75mm filament and what step causes jams?

Heat the nozzle to 190-230°C, push filament until it extrudes cleanly; the step people skip is feeding the loose end through the spool holes after every print to stop it crossing over itself and tangling.

What upkeep does the Silk PLA spool need over time?

Keep it dry — after opening, return unused filament to the vacuum bag with the desiccant and store in a cool place; if the printer sits idle more than a couple of days, retract the filament to protect the nozzle.

At what print speed does the shiny finish start to degrade?

The supplier rates printing speed at 40-100 mm/s; pushing beyond 100 mm/s is where layer adhesion and the silk surface quality drop off first.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。