暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Eight white G1/4 compression fittings with diamond knurl for 10x13mm tubing

FormulaMod

FormulaMod G1/4" Compression Fitting 10x13mm White 8 Pack

SKU CH-8H3F-GQKFQ

Eight G1/4" brass compression fittings for 10x13mm soft tubing with diamond-textured grip

  • TypeFittings

Option White

  • Secure leak-free loops with G1/4" threads for 10x13mm soft tubing
  • Durable H59 brass construction resists corrosion in liquid cooling systems
  • Diamond-textured collars improve grip during installation and maintenance
  • Eight fittings per pack cover multi-block custom loop builds
  • Compression design seals 3/8" ID × 1/2" OD tubing without clamps

G1/4" Compression Fittings for 10x13mm Soft Tube

This eight-pack of FormulaMod compression fittings connects 10x13mm soft tubing to any component with a G1/4" thread. The H59 brass bodies and diamond-textured collars give a secure, leak-free seal without tools. They suit builders assembling or expanding a custom water-cooling loop.

Upgrading from push-fit or barb fittings

Compression collars grip the tube OD mechanically, removing the risk of pop-off that push-fit rings can allow under pressure cycles. The diamond knurl lets you tighten by hand to a repeatable torque, so you avoid the overtightening that cracks acrylic tops or strips soft-threaded blocks.

Sustained loop pressure and thermal cycling

H59 brass resists the stress-corrosion that can develop when coolant chemistry shifts over months of continuous operation. The compression design maintains clamp load as tubing relaxes with heat, so seal integrity holds through daily warm-up and cool-down cycles without re-torquing.

特長

  • Secure leak-free loops with G1/4" threads for 10x13mm soft tubing
  • Durable H59 brass construction resists corrosion in liquid cooling systems
  • Diamond-textured collars improve grip during installation and maintenance
  • Eight fittings per pack cover multi-block custom loop builds
  • Compression design seals 3/8" ID × 1/2" OD tubing without clamps

仕様

TypeFittings

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What tube dimensions does the G1/4" fitting accept?

The fitting is made for 10x13mm soft tube, which matches 3/8" inner diameter and 1/2" outer diameter.

Which step is often missed when installing the compression ring?

Slide the compression collar onto the tube before pushing the tube over the barbed base, then tighten the collar by hand plus a quarter turn with a spanner.

When should the O-rings inside these brass fittings be replaced?

Inspect the O-rings whenever the loop is drained; replace any that show flattening, cracking or loss of elasticity to prevent leaks.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。