BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
$214.99
0.0027676BTC
在庫あり
G.SKILL
G.SKILL Trident Z Royal F4-4266C17D-32GTRSB 32GB DDR4 4266 CL17 desktop RAM
32 GB dual-channel DDR4 kit rated at 4266 MT/s CL17 with crystalline RGB light bar and silver mirror-finish heatspreaders
- Capacity32GB (2 x 16GB)
- Type288-Pin PC RAM
- SpeedDDR4 4266 (PC4 34100)
- CAS LatencyCL17
- Timing17-18-18-38
- Voltage1.50V
- Dual-channel 32 GB kit for high-capacity multitasking
- DDR4 4266 speed with CL17 latency for responsive performance
- Intel XMP 2.0 profile enables rated timings automatically
- Crystalline light bar with 8 RGB zones per module
- Silver CNC aluminium heatspreaders cool modules efficiently
High-Speed Dual-Channel Kit
This 32GB kit contains two 16GB DDR4 modules rated at 4266 MT/s with CL17 timings. It targets enthusiasts building Intel Z590 or Z490 platforms who want high-frequency memory with RGB lighting. The unbuffered DIMMs require a motherboard that supports Intel XMP 2.0 profiles to reach the rated speed.
Build Integration Requirements
The 288-pin modules fit standard desktop DIMM slots and operate at 1.50V, which is higher than the DDR4 base specification. A compatible Intel Z490 or Z590 board with XMP 2.0 is needed to enable the 4266 MT/s profile automatically. The dual-channel kit populates two slots, leaving remaining slots free for future expansion if the board has four slots.
Thermals and Power Profile
CNC-cut aluminum heatspreaders with a silver mirrored finish cover the hand-screened ICs and a custom 10-layer PCB to dissipate heat during sustained loads. The 1.50V operating voltage draws more power than standard JEDEC modules, so adequate case airflow is recommended. No moving parts are present, so the memory itself adds no acoustic noise to the system.
特長
- Dual-channel 32 GB kit for high-capacity multitasking
- DDR4 4266 speed with CL17 latency for responsive performance
- Intel XMP 2.0 profile enables rated timings automatically
- Crystalline light bar with 8 RGB zones per module
- Silver CNC aluminium heatspreaders cool modules efficiently
仕様
| Brand | G.SKILL |
|---|---|
| Series | Trident Z Royal Series |
| Model | F4-4266C17D-32GTRSB |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 4266 (PC4 34100) |
| CAS Latency | CL17 |
| Timing | 17-18-18-38 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Color | Silver |
| Heat Spreader | Yes |
| Features | Unique crystalline light bar design. Mirrored-finish aluminum heatspreaders in gold or silver. Fluid rainbow wave default lighting effect. Hand-screened IC & custom 10-layer PCB for improved overclock performance. Intel XMP 2.0 Support. Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure. Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware. For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP |
| Recommend Use | Intel Z590 / Z490 |
| LED Color | RGB |
| 配送重量 | 0.25 kg |
| 梱包サイズ | 180 × 135 × 13 mm |
この商品に関する質問
Will this 4266 MHz kit run at its rated speed on a Z490 or Z590 motherboard without manual tuning?
The kit includes an Intel XMP 2.0 profile that sets 4266 MHz, CL17-18-18-38 at 1.50 V when enabled in the BIOS on supported Z490 or Z590 platforms.
Does the dual-channel kit fit standard DDR4 slots and clear large CPU coolers?
Each module uses the standard 288-pin DDR4 form factor with a low-profile Trident Z heatspreader designed for compatibility with most air coolers.
Can I control the RGB lighting without extra cables or a separate controller?
The 8-zone RGB on each module is managed through G.SKILL software or motherboard RGB utilities via the standard 5 V addressable header on the board.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
