Micron Technology, Inc. MT4JTF12864AZ-1G4D1 1GB DDR3 1333 Desktop RAM
- 1GB
- DDR3 1333 (PC3 1060…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
G.SKILL
32 GB dual-channel DDR4 kit rated at 4266 MT/s CL17 with crystalline RGB light bar and silver mirror-finish heatspreaders
This 32GB kit contains two 16GB DDR4 modules rated at 4266 MT/s with CL17 timings. It targets enthusiasts building Intel Z590 or Z490 platforms who want high-frequency memory with RGB lighting. The unbuffered DIMMs require a motherboard that supports Intel XMP 2.0 profiles to reach the rated speed.
The 288-pin modules fit standard desktop DIMM slots and operate at 1.50V, which is higher than the DDR4 base specification. A compatible Intel Z490 or Z590 board with XMP 2.0 is needed to enable the 4266 MT/s profile automatically. The dual-channel kit populates two slots, leaving remaining slots free for future expansion if the board has four slots.
CNC-cut aluminum heatspreaders with a silver mirrored finish cover the hand-screened ICs and a custom 10-layer PCB to dissipate heat during sustained loads. The 1.50V operating voltage draws more power than standard JEDEC modules, so adequate case airflow is recommended. No moving parts are present, so the memory itself adds no acoustic noise to the system.
| Brand | G.SKILL |
|---|---|
| Series | Trident Z Royal Series |
| Model | F4-4266C17D-32GTRSB |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 4266 (PC4 34100) |
| CAS Latency | CL17 |
| Timing | 17-18-18-38 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Color | Silver |
| Heat Spreader | Yes |
| Features | Unique crystalline light bar design. Mirrored-finish aluminum heatspreaders in gold or silver. Fluid rainbow wave default lighting effect. Hand-screened IC & custom 10-layer PCB for improved overclock performance. Intel XMP 2.0 Support. Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure. Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware. For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP |
| Recommend Use | Intel Z590 / Z490 |
| LED Color | RGB |
| Shipping weight | 0.25 kg |
| Package size | 180 × 135 × 13 mm |
The kit includes an Intel XMP 2.0 profile that sets 4266 MHz, CL17-18-18-38 at 1.50 V when enabled in the BIOS on supported Z490 or Z590 platforms.
Each module uses the standard 288-pin DDR4 form factor with a low-profile Trident Z heatspreader designed for compatibility with most air coolers.
The 8-zone RGB on each module is managed through G.SKILL software or motherboard RGB utilities via the standard 5 V addressable header on the board.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?