暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Gulfe

Gulfe ATX Power Supply for HP Pavilion Elite HPE H8-1040

SKU CH-89KV-FXDTD

ATX power supply with reduced depth, 24-pin and 4-pin connectors, three SATA outputs, and over-current protection

  • TypeATX
  • Fans1
  • Weight2.5
  • ATX reduced depth fits compact HP Pavilion Elite cases
  • 115/230 V input supports worldwide mains voltages
  • Over-current and over-power protection guards components
  • 24-pin ATX, 4-pin CPU, three SATA and two LP4 connectors cover legacy builds
  • 17 ms hold-up time maintains power through brief dips

Direct Replacement for HP Pavilion Elite HPE H8-1040

This ATX power supply is built as a direct replacement for the HP Pavilion Elite HPE H8-1040 desktop. It matches the original form factor and connector layout so the system powers on without adapter cables or modifications. The unit is new and includes over-current and over-power protection circuits.

Reduced Depth ATX Form Factor Fits Tight Chassis

A reduced depth of 5.86 inches by 3.3 inches lets this unit slide into compact brand-name cases where a full-depth ATX supply would foul drive cages or motherboard headers. The single fan exhausts heat through the rear grille. Standard 115 or 230 volt AC input works worldwide without a voltage switch.

24-Pin ATX Plus Legacy Connectors Cover Older Builds

The harness provides a 24-pin (20+4) motherboard connector, a 4-pin CPU power plug, three SATA power leads, two LP4 peripheral plugs and one floppy connector. This mix supports a modern motherboard plus multiple hard drives and legacy optical or floppy drives. Hold-up time is rated at 17 ms minimum at nominal input.

特長

  • ATX reduced depth fits compact HP Pavilion Elite cases
  • 115/230 V input supports worldwide mains voltages
  • Over-current and over-power protection guards components
  • 24-pin ATX, 4-pin CPU, three SATA and two LP4 connectors cover legacy builds
  • 17 ms hold-up time maintains power through brief dips

仕様

BrandGulfe
TypeATX
Fans1
Weight2.5

この商品に関する質問

Does the 2.5 kg weight affect heat dissipation during continuous operation?

The single fan and 2.5 kg mass provide standard cooling for the 17 ms hold-up time rating.

What noise level should I expect from the fan after hours of use?

One fan runs at the speed needed for the +12V1 and +12V2 rails under load.

Which existing cables must my HP Pavilion Elite HPE H8-1040 already have for this unit to connect?

Your motherboard needs a 24-pin ATX socket, a 4-pin P4-12V header, plus SATA and LP4 ports for drives.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。