SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
HGST
Helium-sealed 8TB enterprise drive with 7200 RPM, 128MB cache and SATA 6.0Gb/s interface
The HGST Ultrastar He8 HUH728080ALE600 delivers 8TB of storage in a standard 3.5-inch form factor. It uses a SATA 6.0Gb/s interface and spins at 7200 RPM with a 128MB cache. Designed for enterprise storage, it handles workloads of up to 550TB per year. The helium-sealed platform reduces internal turbulence for consistent operation.
HelioSeal technology enables the industry's best idle and active power efficiency measured in watts per terabyte. Lower power draw translates to reduced heat output in multi-drive enclosures. Average latency sits at 4.16ms while average seek time is 8.5ms. The 26.10mm height fits standard drive bays without special cooling requirements.
This drive replaces multiple smaller drives in RAID or JBOD configurations, cutting slot count and cabling. Rebuild Assist accelerates RAID rebuild times while maintaining system performance during the process. The jump is worth it when consolidating 4TB or 6TB units to gain density and lower watts per terabyte. It is not for systems limited to 512-byte sector addressing without 512e support.
| Brand | HGST |
|---|---|
| Series | Ultrastar He8 |
| Model | HUH728080ALE600 (0F25739) |
| Packaging | Bare Drive |
| Interface | SATA 6.0Gb/s |
| Capacity | 8TB |
| RPM | 7200 RPM |
| Cache | 128MB |
| Average Seek Time | 8.5ms |
| Average Write Time | 9ms |
| Average Latency | 4.16ms |
| Features | Highlights - Spacious 8TB capacity in a standard 3.5-inch form factor - Industry's best Idle and Active power efficiency (Watts/TB) - Reliable, field-proven, 2nd generation HelioSeal process and 7Stac design - Rebuild Assist mode shrinks RAID recovery time and nearly eliminates system performance degradation during rebuild - Compared to 4TB Ultrastar 7K4000 Double the capacity 60% more power efficient (Watts/TB) 1.5X to 3X faster random write performance thanks to media cache architecture 19% faster sequential read/write performance - SATA 6Gb/s and SAS 12Gb/s - Advanced format 4Kn a |
| Usage | For Enterprise Storage |
| Form Factor | 3.5" |
| Height (maximum) | 26.10mm |
| Width (maximum) | 101.60mm |
| Length (maximum) | 147.00mm |
| 配送重量 | 1.13 kg |
| 梱包サイズ | 154 × 136 × 29 mm |
Mount the bare drive in a 3.5" bay using the standard side screw holes, connect the SATA data cable to a 6.0Gb/s port and the SATA power cable, then ensure the host controller is set to AHCI mode so the 128MB cache and 7200 RPM performance are fully utilised.
The sealed helium design requires no internal maintenance; plan replacement after the 550TB per year workload rating is reached or when SMART attributes indicate wear, as the HelioSeal process cannot be serviced in the field.
The 550TB per year workload rating is the first sustained-use limit; exceeding it can accelerate wear beyond the 2nd generation HelioSeal and 7Stac design specifications.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?