暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

HP

HP 793669-B21 4TB 7200RPM SAS 3.5" internal hard drive

SKU CH-ZYF1-VHEP3

A 4 TB SAS internal hard drive spinning at 7200 RPM in a 3.5-inch form factor for desktop storage

  • InterfaceSAS
  • Capacity4TB
  • RPM7200 RPM
  • Form Factor3.5"
  • High-capacity 4 TB storage for large data sets
  • 7200 RPM spindle speed for fast sequential access
  • 12 Gb/s SAS interface for enterprise-grade throughput
  • 5-inch form factor fits standard drive bays
  • New condition ensures full manufacturer specifications

HP 793669-B21 4TB SAS drive

The HP 793669-B21 is a 4TB internal hard drive with a 3.5 inch form factor. It spins at 7200 RPM and uses a SAS interface rated at 12Gb/s. The drive is built for enterprise servers and storage arrays that demand high capacity and sustained throughput.

Check SAS controller and bay compatibility

Verify that your server or enclosure has a SAS backplane or controller supporting 12Gb/s SAS links. The drive requires a standard 3.5 inch drive bay and appropriate power and data cabling for SAS. Confirm the system firmware recognises 4TB SAS devices before installation.

Packing may vary between retail and OEM

The drive ships in either retail or OEM packaging depending on stock. No mounting rails, screws, cables or software utilities are included in the box. Installers must supply any required hardware or management tools separately.

特長

  • High-capacity 4 TB storage for large data sets
  • 7200 RPM spindle speed for fast sequential access
  • 12 Gb/s SAS interface for enterprise-grade throughput
  • 5-inch form factor fits standard drive bays
  • New condition ensures full manufacturer specifications

仕様

InterfaceSAS
Capacity4TB
RPM7200 RPM
Form Factor3.5"

この商品に関する質問

Does the 793669-B21 4TB SAS drive ship with any cables or mounting brackets, or do I need to buy those separately?

The drive is supplied in retail or OEM packing that may vary; no cables, brackets or screws are guaranteed in the box.

The spec sheet lists a 12Gb/s SAS interface — is there a slower 6Gb/s version of the same 4TB model I should consider?

Only the 12Gb/s SAS variant is offered for this 4TB part; no alternative speed version exists.

What sustained transfer rate can I expect from the 7200 RPM mechanism once the drive is installed in a server?

The 7200 RPM spindle delivers typical sequential throughput around 200 MB/s, limited by the mechanical media rather than the 12Gb/s SAS link.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。