暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Rectangular black metal power supply unit with side ventilation grilles and rear connector panel

HP

HP Aruba X371 12VDC 250W Power Supply JL085A

SKU CH-G8MG-VTD40

Proprietary 250 W power module accepting 120 V or 230 V AC input for Aruba X371 switches

  • TypeProprietary Power Supply
  • Reliable 250 W output for Aruba 371 switches
  • Auto-ranging 120 V or 230 V AC input for global use
  • Proprietary form factor ensures direct compatibility with JL085A slot
  • Hot-swap power module design minimises network downtime during maintenance

HP Aruba X371 250W Proprietary Power Module

The HP Aruba X371 is a proprietary 250 watt power module designed for compatible Aruba network switches. It delivers 12 V DC output to support switch operation in enterprise environments. This new unit carries part number JL085A and serves as a direct replacement or spare for supported hardware. It is not intended for standard ATX desktop builds or generic server chassis.

120-230 V AC Input with 12 V DC Output

The supply accepts 120 V AC or 230 V AC mains input and converts it to a 12 V DC rail rated at 250 W. Normal operating thermals and acoustic levels are governed by the host switch chassis and its integrated cooling design. Power draw scales with the connected switch load up to the 250 W maximum. Builders needing redundant or higher-capacity modules should verify compatibility with their specific switch model.

特長

  • Reliable 250 W output for Aruba 371 switches
  • Auto-ranging 120 V or 230 V AC input for global use
  • Proprietary form factor ensures direct compatibility with JL085A slot
  • Hot-swap power module design minimises network downtime during maintenance

仕様

TypeProprietary Power Supply

この商品に関する質問

How do I install the JL085A power supply into an Aruba X371 switch, and which step is often missed?

Slide the module into the chassis until the latch clicks, then tighten the captive screws to secure it; the step often missed is fully tightening those screws so the unit seats properly on the 12 V DC bus.

What maintenance will the JL085A power supply need during its service life?

Clean the intake vents periodically to prevent dust build-up on the internal fan, and replace the unit if the front LED shows a fault or the switch logs a 12 V DC rail failure.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。