OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
HP
Delivers 550 W at 12 V for compatible Proliant Gen9 servers, accepting 100-240 V input at 3.3 A
This HP HSTNS-PL53 unit delivers 550W at 12V for ProLiant Gen9 servers such as the DL180, DL160, DL120, DL80 and DL60. It accepts 100-240V input at 50-60Hz and draws 3.3A, providing 45.8A on the 12V rail. The PS-2551-2C-LF design matches part numbers 748949-001, 766879-001 and 765423-201.
The supply slides into the standard hot-plug bay on supported Gen9 chassis, letting you replace it without shutting down the server. Redundant pairing frees uptime for critical workloads while the common 12V output simplifies cabling inside the rack. No extra adapters are required for the listed models.
Each unit ships with the HP part-number labels 748949-001, 766879-001 and 765423-201 already applied, so asset tracking and warranty registration match vendor records immediately. The labels remove guesswork during inventory audits and speed up support calls. No separate software or firmware bundle is supplied.
| Brand | HP |
|---|---|
| Series | Proliant |
| Model | HSTNS-PL53, PS-2551-2C-LF |
| Type | Power Supply |
The unit delivers 550W total with a 12V output rated at 45.8A, so the full wattage is available on that single rail under sustained use.
The PSU uses the server’s managed fan wall; noise and exhaust temperature follow the system’s thermal profile rather than an internal fan curve.
It fits Proliant Gen9 DL60, DL80, DL120, DL160 and DL180 directly, using the native hot-plug slot and backplane connector.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?