暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

HP

HP J9306A#B2E 1500W Proprietary Power Supply

SKU CH-P80N-C1JYS MPN J9306A#B2E

A 1500 W proprietary power supply delivering 300 W PoE+ at 110-127 V AC, 900 W PoE+ at 200-240 V AC and 600 W for switch power

  • TypeProprietary Power Supply
  • Maximum Power1500 W
  • FeaturesInput Voltage:110 V AC 220 V AC Weight (Approximate):7.50 lb
  • Dimensions5.1" Height x 7.5" Width x 6.1" Depth
  • Delivers 1500 W total output for demanding network infrastructure
  • Provides 900 W PoE+ power at 200-240 V AC input
  • Supplies 300 W PoE+ power at 110-127 V AC input
  • Reserves 600 W for switch operation independent of PoE load
  • Compact 5.1" x 7.5" x 6.1" form factor fits standard zl chassis

Proprietary 1500W Power Supply for HP zl Switches

This proprietary 1500W power supply is built for HP zl series network switches. It delivers both switch operating power and PoE+ capacity in a single module. Network administrators use it to power access points, phones and cameras through the switch ports.

PoE+ Headroom at Two Voltage Ranges

At 110 to 127 volts the unit provides 300W for PoE+ devices, while at 200 to 240 volts it provides 900W for PoE+ devices. Switch operating power is rated at 600W across both ranges. PoE+ capacity therefore depends on the local mains voltage available.

Replaces Existing zl Supply When PoE+ Demand Grows

It replaces a lower-wattage zl power supply when the connected PoE+ load exceeds the original module’s budget. The upgrade is worth it when the deployment adds more powered devices or moves to a 200 to 240 volt supply to unlock the higher PoE+ ceiling.

特長

  • Delivers 1500 W total output for demanding network infrastructure
  • Provides 900 W PoE+ power at 200-240 V AC input
  • Supplies 300 W PoE+ power at 110-127 V AC input
  • Reserves 600 W for switch operation independent of PoE load
  • Compact 5.1" x 7.5" x 6.1" form factor fits standard zl chassis

仕様

BrandHP
TypeProprietary Power Supply
Maximum Power1500 W
FeaturesInput Voltage:110 V AC
220 V AC
Weight (Approximate):7.50 lb
Input Voltage Type:AC
Dimensions5.1" Height x 7.5" Width x 6.1" Depth
配送重量4.15 kg
梱包サイズ353 × 274 × 267 mm

この商品に関する質問

Will the J9306A#B2E power supply fit in my existing HP zl series switch chassis?

This unit is a proprietary power supply designed for HP zl series switches and measures 5.1" Height x 7.5" Width x 6.1" Depth, matching the zl power supply bay form factor.

How can I verify the J9306A#B2E is delivering the correct PoE+ power after installation?

The switch management interface reports real-time PoE consumption; at 110-127 V AC input you should see up to 300 W available for PoE+, and at 200-240 V AC up to 900 W for PoE+ alongside 600 W reserved for switch operation.

What comes with the J9306A#B2E and what must I source separately?

The power supply module itself is included; an AC power cord with the correct regional plug for 110 V AC or 220 V AC operation is not included and must be obtained separately.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。