暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

HP

HP MB4000GDMTH 4TB 7200RPM 3.5" SATA internal hard drive

SKU CH-NHDS-YQJH3

A 4 TB 3.5 inch SATA desktop hard drive spinning at 7200 RPM, supplied with a Smart Carrier caddy

  • 4 TB capacity stores large media libraries and backups
  • 7200 RPM spindle speed delivers quick file access
  • SATA 6 Gb/s interface enables fast data transfer
  • 5 inch form factor fits standard desktop drive bays
  • Includes Smart Carrier caddy for secure mounting

HP 4 TB SATA hard drive

This HP MB4000GDMTH is a 3.5-inch internal hard drive with 4 TB capacity, 7200 RPM spindle speed and a SATA 6 Gb/s interface. It ships new with zero hours and includes the HP Smart Carrier caddy tray for tool-less installation in compatible bays.

Suited for bulk storage in servers and workstations

The drive fits 3.5-inch hot-swap bays that accept the HP Smart Carrier tray, making it a direct replacement for part numbers 693720-001 and 693687-B21. Builders whose chassis uses fixed screw-mount trays or proprietary carrier systems will not be able to install this unit.

SATA 6 Gb/s interface and Smart Carrier tray

The single specification that determines compatibility is the SATA 6 Gb/s interface combined with the included Smart Carrier tray; the host system must provide a 3.5-inch SATA backplane and support the HP carrier form factor for the drive to seat and operate correctly.

特長

  • 4 TB capacity stores large media libraries and backups
  • 7200 RPM spindle speed delivers quick file access
  • SATA 6 Gb/s interface enables fast data transfer
  • 5 inch form factor fits standard desktop drive bays
  • Includes Smart Carrier caddy for secure mounting

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

How do I fit the included SMART CARRIER tray into a 3.5" bay?

Slide the drive into the tray until it clicks, then insert the assembly into the bay and secure it with the four side screws; the step often missed is tightening those screws evenly so the drive sits flush.

What part will need replacement first during long-term operation?

The mechanical spindle and actuator arms inside the 7200RPM mechanism wear over time; SMART attributes such as reallocated sector count will signal when the drive should be swapped.

Which limit appears first when the drive runs at full speed for hours?

Sustained 7200RPM operation generates heat that hits the thermal throttle point before the 6Gb/s SATA link saturates, so adequate case airflow is the practical ceiling.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。