暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5-inch internal hard drive with circuit board visible

HPE

HPE 4TB 7200 RPM SATA 3.5" Internal Hard Drive 861683-B21

SKU CH-J4WA-WT9HZ

A 4 TB 7200 RPM SATA 3.5-inch internal hard drive for HPE Apollo 4200 Gen9 servers

  • InterfaceSATA
  • Capacity4TB
  • RPM7200 RPM
  • Form Factor3.5"
  • 4 TB capacity stores large datasets
  • 7200 RPM spindle speed delivers responsive data access
  • SATA 600 interface provides broad system compatibility
  • 5 inch form factor fits standard drive bays
  • Designed for HPE Apollo 4200 Gen9 server integration

HPE 4TB 7200 RPM SATA Hard Drive

This HPE internal hard drive provides 4TB of storage on a 3.5-inch form factor. It operates at 7200 RPM with a SATA 600 interface for standard desktop or server installations. The drive is supplied new and carries part number 861683-B21.

Suited for capacity-focused storage arrays

This drive suits administrators expanding HPE Apollo 4200 Gen9 Server storage or populating 3.5-inch bays with high-capacity rotational media. Builders who need solid-state speed, a smaller 2.5-inch form factor, or a different interface should look at other options.

SATA 600 interface determines host compatibility

The drive connects through a SATA 600 interface, so the host system must provide a matching SATA port. Verify that the server or desktop backplane supports 3.5-inch drives and the required SATA revision before purchase.

特長

  • 4 TB capacity stores large datasets
  • 7200 RPM spindle speed delivers responsive data access
  • SATA 600 interface provides broad system compatibility
  • 5 inch form factor fits standard drive bays
  • Designed for HPE Apollo 4200 Gen9 server integration

仕様

InterfaceSATA
Capacity4TB
RPM7200 RPM
Form Factor3.5"

この商品に関する質問

Will the 3.5" form factor fit a standard LFF drive bay in an HPE Apollo 4200 Gen9 server?

Yes, the 3.5" large form factor matches the LFF bays used in the HPE Apollo 4200 Gen9, and the SATA interface connects directly to the server backplane.

How is the drive installed in the server, and what step is often missed?

Slide the drive into the hot-plug carrier until it clicks, then close the carrier lever fully; the step often missed is not seating the carrier latch completely, which prevents the server from detecting the drive.

What maintenance or replacement should be planned for this 7200 RPM drive over time?

Monitor SMART attributes for reallocated sectors and rising seek errors; replace the drive once the SMART health status indicates imminent failure or after the rated workload limit is reached.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。