暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small silver 2.5 inch SAS solid state drive with label showing 400 GB capacity

HPE

HPE 787336-001 400 GB 2.5" SAS 12Gb/s internal solid state drive

SKU CH-THWG-X7QV6

400 GB 2.5" SAS 12Gb/s internal solid state drive for HPE MSA 2040 SAN storage systems

  • 400 GB capacity stores large datasets on a single drive
  • 12Gb/s SAS interface delivers fast data transfer for storage systems
  • 5-inch form factor fits standard internal drive bays
  • Designed for HPE MSA 2040 SAN Storage compatibility
  • New condition ensures full manufacturer specification and reliability

HPE 787336-001 400 GB SAS 12Gb/s SSD

This HPE solid state drive provides 400 GB of storage in a 2.5 inch internal form factor. It connects through a SAS interface operating at 12Gb/s. The drive is designed for use in HPE MSA 2040 SAN Storage systems. It ships in new condition with packaging that may vary.

Replacing mechanical SAS drives in MSA 2040 arrays

The drive upgrades storage systems currently using spinning SAS disks of the same physical size and interface. The jump is worth it when the workload needs lower latency and higher IOPS without changing cabling or controller hardware. It fits directly into existing 2.5 inch drive bays. The 12Gb/s link matches current controller speeds.

Suited for HPE MSA 2040 SAN capacity expansion

This unit suits administrators expanding capacity or refreshing tiers inside a compatible MSA 2040 enclosure. Buyers who need a different interface, a larger capacity, or support for non-HPE arrays should look at other options. The fixed 400 GB capacity may not meet high-density requirements. Compatibility is limited to the stated storage system.

特長

  • 400 GB capacity stores large datasets on a single drive
  • 12Gb/s SAS interface delivers fast data transfer for storage systems
  • 5-inch form factor fits standard internal drive bays
  • Designed for HPE MSA 2040 SAN Storage compatibility
  • New condition ensures full manufacturer specification and reliability

仕様

BrandHPE

この商品に関する質問

Will the 2.5" form factor fit a standard 2.5" drive bay in the HPE MSA 2040 SAN Storage?

Yes, the 2.5" form factor matches the standard 2.5" drive bays used in the HPE MSA 2040 SAN Storage enclosure.

How is the SAS 12Gb/s drive installed in the HPE MSA 2040, and what step is often missed?

Slide the drive into a hot-plug carrier until the connector seats firmly, then lock the carrier latch; the step often missed is fully engaging the latch so the drive registers with the controller.

When should the 400 GB SAS solid state drive be replaced in an HPE MSA 2040 array?

Replace the drive when the HPE MSA 2040 management software reports a predictive failure alert or when the drive reaches its rated write endurance limit.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。