暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

HPE

HPE 833928-B21 4TB 7.2K 12Gbps SAS 3.5" internal hard drive

SKU CH-P6QE-TNCMA

A 4 TB SAS hard drive spinning at 7200 RPM with a 12 Gb/s interface in a 3.5 inch hot-swap form factor

  • InterfaceSAS 12Gb/s
  • Capacity4TB
  • RPM7200 RPM
  • Average Seek Time8.5ms
  • Form Factor3.5"
  • 4TB capacity stores large datasets
  • 12Gbps SAS interface enables fast data transfer
  • 7200 RPM spindle speed supports responsive performance
  • 5-inch form factor fits standard drive bays
  • Hot-swap design allows drive replacement without downtime

HPE 4TB 12Gb/s SAS Enterprise Drive

This HPE 833928-B21 is a 4TB 3.5" internal hard drive built for enterprise and midline workloads. It spins at 7200 RPM and connects through a SAS 12Gb/s interface with an average seek time of 8.5ms. The drive is supplied new in a hot-swap carrier.

Suited for high-transaction servers and arrays

Buyers who need a 12Gb/s SAS connection for high-availability storage will find the correct interface and form factor here. Builders whose chassis or controller only accept 2.5" drives or a different interface cannot use this part.

The SAS 12Gb/s interface decides compatibility

The drive requires a backplane and controller that support 12Gb/s SAS signalling. Without that link the drive will not function, so verify the host system provides a SAS 12Gb/s connection before purchase.

特長

  • 4TB capacity stores large datasets
  • 12Gbps SAS interface enables fast data transfer
  • 7200 RPM spindle speed supports responsive performance
  • 5-inch form factor fits standard drive bays
  • Hot-swap design allows drive replacement without downtime

仕様

BrandHPE
Part Number833928-B21
InterfaceSAS 12Gb/s
Capacity4TB
RPM7200 RPM
Average Seek Time8.5ms
Form Factor3.5"

この商品に関する質問

How do I install the 833928-B21 in a hot-swap 3.5" SAS bay?

Slide the drive into the carrier until the connector seats firmly on the 12Gbps SAS backplane, then lock the lever; the step most people miss is not fully engaging the carrier latch, which leaves the drive loose and causes connection errors

What maintenance will the 4TB 7200 RPM drive need later?

No scheduled maintenance is required; monitor SMART attributes for reallocated sectors and rising seek times, and replace the unit once the error counters approach the manufacturer thresholds

What limit appears first when the 12Gbps SAS drive runs sustained writes?

The 7200 RPM spindle caps sequential throughput at the media transfer rate, so sustained write streams hit the mechanical speed ceiling before the 12Gbps interface saturates

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。