暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 2U rack enclosure with twenty-four 2.5-inch drive bays and dual controllers

HPE

HPE MSA 2070 SAN Storage System 24-Bay 2U Rack Mount

SKU CH-R699-S7B2S

A 2U rack-mount SAN storage system with 24 drive bays, dual 12Gb/s SAS controllers and RAID support

  • 24 drive bays let you scale capacity with HDDs or SSDs
  • Dual 12Gb/s SAS controllers provide redundant data paths
  • RAID 0, 1, 5, 6, 10 protects data against drive failure
  • Clustering support enables high-availability storage pools
  • Two 580 W redundant power supplies keep the system running during a power-module fault

HPE MSA 2070 24-Bay SAN Array

The HPE MSA 2070 is a 2U rack-mountable SAN storage system designed for organisations that need consolidated block storage with dual-controller redundancy. It supports up to 24 drives, accepting both 2.5-inch HDDs and SSDs, and ships with zero drives installed so you can populate it to match capacity and performance targets.

Dual 12Gb/s SAS controllers with four external ports

Two 12Gb/s SAS controllers provide active-active failover and four external SAS ports for host connectivity. The chassis includes two redundant 580 W power supplies with C14 connectors. Installation is straightforward in a standard rack, but you must source and install all drives and configure RAID 0, 1, 5, 6 or 10 before the array can serve data.

Sustained throughput with clustering and remote

Under continuous workloads the dual-controller design balances I/O across both nodes, and clustering support lets you scale out by adding a second system. Management runs over Gigabit Ethernet using SNMP, SSH, HTTPS, SFTP and other standard protocols, giving administrators scriptable control during extended operations without relying on a single point of failure.

特長

  • 24 drive bays let you scale capacity with HDDs or SSDs
  • Dual 12Gb/s SAS controllers provide redundant data paths
  • RAID 0, 1, 5, 6, 10 protects data against drive failure
  • Clustering support enables high-availability storage pools
  • Two 580 W redundant power supplies keep the system running during a power-module fault

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

How can I verify the two 12Gb/s SAS controllers are active after racking the 2U MSA 2070?

Check the management interface over HTTPS or SSH; both controllers should show online status and the four external SAS ports should report link-up when host cables are connected.

What ships with the S1H48A and what must I order separately?

The chassis includes two 580 W redundant power supplies with C14 connectors and twenty-four empty 2.5" bays; drives, SAS host cables and rail kit are not included.

Which drive mix should I choose for the 24-bay MSA 2070?

All twenty-four bays accept 2.5" HDDs or SSDs in any combination; select capacity and SSD count based on the RAID level — 0, 1, 5, 6 or 10 — required for your workload.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。