暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 2.5 inch SATA solid state drive with label

HPE

HPE P18436-B21 1.92 TB 2.5" SATA 600 3.1 DWPD 520 MB/s enterprise SSD

SKU CH-WNYD-E7Y9V MPN P18436-B21

2.5-inch SATA mixed-use server SSD delivering 1.92 TB capacity, 520 MB/s reads and 3.1 DWPD endurance

  • Endurance3.1 DWPD
  • 92 TB capacity supports mixed workloads
  • 1 DWPD endurance handles sustained write cycles
  • 520 MB/s read speed accelerates data access
  • SATA 600 interface fits existing server bays
  • 5" hot-pluggable form factor enables live replacement

Enterprise SSD for mixed-use servers

The HPE P18436-B21 is a 1.92 TB 2.5-inch SATA solid-state drive built for mixed-use workloads in server environments. It supports hot-plug installation and carries an endurance rating of 3.1 DWPD for sustained write performance.

SATA 600 interface throughput limit

The drive connects through a SATA 600 interface, which caps the maximum read transfer rate at 520 MB/s. This bandwidth ceiling defines the practical speed limit for any workload running on this device.

3.1 DWPD endurance rating

The 3.1 drive-writes-per-day figure is the single specification that determines whether this SSD matches the write intensity of your application. Buyers who need higher write endurance for heavy logging or caching should verify this rating against their workload profile.

特長

  • 92 TB capacity supports mixed workloads
  • 1 DWPD endurance handles sustained write cycles
  • 520 MB/s read speed accelerates data access
  • SATA 600 interface fits existing server bays
  • 5" hot-pluggable form factor enables live replacement

仕様

BrandHP
Endurance3.1 DWPD
配送重量0.45 kg
梱包サイズ224 × 188 × 140 mm

この商品に関する質問

Is the 1.92 TB capacity the right choice for mixed-use server workloads?

Yes, the 1.92 TB model delivers 3.1 DWPD endurance, which is designed for mixed read and write workloads on supported server devices.

What does the 520 MB/s maximum read transfer rate mean once the drive is installed?

It represents the peak sequential read speed achievable over the SATA 600 interface under optimal conditions; sustained throughput will depend on the server controller and workload mix.

How does the SATA 600 interface cap real-world performance?

The SATA 600 link tops out at 6 Gb/s, so the 520 MB/s read rating sits near the practical ceiling of the bus; write speeds and random IOPS will be lower.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。