暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

HPE

HPE ProLiant DL360 Gen10 8SFF 2x Xeon Silver 4114 1TB DDR4 rack server

SKU CH-2C9E-TTCVH

Dual Xeon Silver 4114 10-core CPUs at 2.2 GHz with 1 TB DDR4 ECC memory, Smart Array P408 SAS controller, eight 2.5-inch SFF bays, Intel 2×10 GbE and 2×1 GbE networking, dual 500 W supplies.

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.2GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size1TB
  • Dual Xeon Silver 4114 processors provide 10 cores each at 2.2GHz
  • 1TB DDR4 ECC registered memory supports large workloads
  • Smart Array P408 SAS controller manages up to 8 drive bays
  • Intel I350/X540 network card adds 2x 10GbE and 2x 1GbE ports
  • Dual 500W Flex Slot power supplies deliver redundant power

HPE ProLiant DL360 Gen10 dual Xeon server

The HPE ProLiant DL360 Gen10 is a 1U rack server built for virtualisation and database workloads. It ships with two Xeon Silver 4114 processors running at 2.2GHz, each providing 10 cores and 13.75MB cache. A full 1TB of DDR4 ECC registered memory is installed across the 24 DIMM slots. The Smart Array P408 SAS controller manages up to eight 2.5-inch SATA drive bays.

Upgrade from single-socket

Moving from a single-processor system doubles the thread count and memory bandwidth, which benefits hypervisor hosts running many virtual machines. The jump is worth it when current CPU utilisation stays high under sustained load or when memory capacity limits the number of concurrent workloads. The second processor also unlocks the full 3TB maximum memory ceiling for future expansion.

Tool-less rail installation with controller caveats

The chassis slides into a standard rack on the included rail kit and locks without tools, while the 500W flex-slot power supplies are hot-pluggable. The P408 controller requires the SAS cables to be seated firmly before the first boot or the array will not initialise. Remote setup via iLO Advanced works once the network ports are configured, but the dedicated management port must be cabled separately from the data interfaces.

特長

  • Dual Xeon Silver 4114 processors provide 10 cores each at 2.2GHz
  • 1TB DDR4 ECC registered memory supports large workloads
  • Smart Array P408 SAS controller manages up to 8 drive bays
  • Intel I350/X540 network card adds 2x 10GbE and 2x 1GbE ports
  • Dual 500W Flex Slot power supplies deliver redundant power

仕様

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.2GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size1TB
Memory TypeDDR4
Max Memory Capacity3TB
Hard Drive (Installed)7,68
Storage ControllerHPE Smart Array P408 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

この商品に関する質問

What rack width and depth does the 36 x 24 x 10 in chassis require?

The chassis measures 36 inches deep by 24 inches wide by 10 inches high; verify your rack provides at least that depth and width clearance plus rear cable space.

How are the two Xeon Silver 4114 processors and the 1TB DDR4 memory installed, and what step is often missed?

Both processors are already seated in the two sockets and the 1TB of DDR4 ECC registered DIMMs are populated; the common miss is forgetting to apply the latest firmware before first boot.

Which drive bays and controller will need attention when adding storage later?

The front supports up to eight 2.5-inch SATA bays driven by the Smart Array P408 SAS controller; plan to add drives and configure RAID arrays through that controller.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。