暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Tall 4U tower server chassis, matte dark grey finish, front drive bays visible

HPE

HPE ProLiant ML350 Gen11 Tower Server Dual Xeon 4410y 12-Core 2.00GHz 1TB DDR5 30.72TB SATA SSD

SKU CH-3DES-QEFHF

Tower server with dual 12-core Xeon 4410y CPUs, 1 TB DDR5-4800 ECC memory and 30.72 TB enterprise SATA SSD storage, plus redundant power and iLO 6 management

  • TypeTower
  • CPU TypeIntel Xeon
  • MAX Processors2
  • Memory TypeDDR5
  • Max Memory Capacity1TB
  • Dual 12-core Xeon 4410y at 2.00 GHz with 3.90 GHz turbo
  • 1 TB DDR5-4800 ECC memory across 16 modules of 64 GB
  • 72 TB enterprise SATA SSD storage on 8 drives of 3.84 TB
  • Redundant hot-swap power supplies keep the server running during replacement
  • Embedded 4-port 1 GbE OCP3 networking plus iLO 6 remote management

Dual Xeon 4410y Tower Server

The HPE ProLiant ML350 Gen11 is a 4U tower server system built around two Intel Xeon Silver 4410y processors, each delivering 12 cores at a 2.00 GHz base frequency with up to 3.90 GHz turbo. It ships with 1TB of DDR5-4800MHz ECC buffered memory across 16 modules of 64GB and 30.72TB of enterprise SATA SSD storage using eight 3.84TB 2.5-inch drives. Redundant power supplies, an embedded 4-port 1GbE OCP3 adapter, MR408i-o storage controller and iLO 6 remote management complete the platform.

Suited for virtualised workloads

This configuration suits organisations running virtualised workloads, database applications or large numbers of simultaneous applications that benefit from dual-socket performance and high memory capacity. Hot-swappable redundant power supplies allow a faulty unit to be replaced without taking the server offline. Buyers who need a rackmount chassis, more than two processor sockets, or storage interfaces other than SATA should evaluate alternative platforms. Memory and drives are supplied separately and require installation before use.

30.72TB SATA SSD capacity

The single specification that decides fit is the 30.72TB enterprise SATA SSD array, delivering high-capacity flash storage on a 6Gb/s interface. Eight 3.84TB 2.5-inch drives connect through the MR408i-o Gen11 controller with 4GB cache. If the workload demands a different drive protocol, higher drive count or larger per-drive capacity, this server will not meet the requirement.

特長

  • Dual 12-core Xeon 4410y at 2.00 GHz with 3.90 GHz turbo
  • 1 TB DDR5-4800 ECC memory across 16 modules of 64 GB
  • 72 TB enterprise SATA SSD storage on 8 drives of 3.84 TB
  • Redundant hot-swap power supplies keep the server running during replacement
  • Embedded 4-port 1 GbE OCP3 networking plus iLO 6 remote management

仕様

TypeTower
CPU TypeIntel Xeon
MAX Processors2
Memory TypeDDR5
Max Memory Capacity1TB

この商品に関する質問

What does the PCIe Gen5 interface cap in practice for this server?

PCIe Gen5 provides efficient data transfer for expansion cards and the MR408i-o storage controller, though the exact bandwidth limit depends on the specific devices installed.

What physical space is needed to mount the 2.5-inch SSDs in this tower chassis?

The server uses eight 2.5-inch drive bays that accept 3.84TB SATA SSDs; ensure the chassis has enough free bays and airflow clearance for all drives.

How are the 16 DDR5 memory modules installed, and what step is often missed?

Install the 16 x 64GB DDR5-4800MHz ECC buffered DIMMs into the correct processor sockets following the population guide; the step often missed is seating each module fully until the ejector clips click.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。